Loading ...
Loading ...
Loading ...
91
ENGLISH
91
Machine actions Causes Solutions
Co ee is not brewed, is
brewed slowly or only a few
drops are brewed (see note).
The ground co ee is too ne. Change co ee blend or adjust grinding as
explained in the “Adjusting the Ceramic
Co ee Grinder” chapter.
Circuits clogged. Perform a descaling cycle.
The circuit is not primed. Prime the circuit (see the “Using the Ma-
chine for the First Time” chapter).
The dispensing spout is dirty. Clean the dispensing spout and its holes.
The brew group is dirty. Clean the brew group (see the “Weekly
Cleaning of the Brew Group” chapter).
Co ee leaks out of the
dispensing spout.
The dispensing spout is clogged or
not correctly inserted.
Clean the dispensing spout and its holes
and insert it back correctly.
The dispenser cannot be
installed on the milk carafe.
The pin is in the wrong position. Manually push the pin to the correct
position and insert the carafe dis-
penser.
Note:
These problems can be considered normal if the co ee blend has been
changed or if the machine has just been installed. In this case, wait until
the machine performs a self-adjusting operation as described in the “Saeco
Adapting System” chapter.
Loading ...
Loading ...
Loading ...