Loading ...
Loading ...
Loading ...
installing the dishwasher _13
02 INSTALLING THE DISHWASHER
Insert the clamped drain hose into the holder hose.
Tighten the clamp in the right position.
Bad Good
The clamp is improperly connected.
Tighten the clamp in the center of the
assembly position.
To prevent damage to the drain hose that is designed to pass
the product to the right, use the provided hose fi xer and screw
to secure the middle area of the drain hose to the product.
Make sure to secure on the arrow-marked area.
If drain hose is not connect completely, an information code of "OC" appears on the display.
<Figure 4>
A
B
C
B
A
C
C
Junction
box
Strain relief
CAUTION
Do not overtighten the 90˚ elbow.
Doing so may damage the water
inlet valve and cause a water leak
CAUTION
DW80H9950US-00151A-06_EN_150216.indd Sec3:13DW80H9950US-00151A-06_EN_150216.indd Sec3:13 2015-02-16 9:57:072015-02-16 9:57:07
Loading ...
Loading ...
Loading ...