Loading ...
Loading ...
Loading ...
7
Before using your appliance
for the first time
Step 1 - Clean the appliance
1. Make sure unit is unplugged and the On/Off
switch is in the Off position “O”.
2. Remove stickers and labels from the unit.
NOTE: REMOVE THE RED PLUG FOUND AT THE
BASE OF THE WATER RESERVOIR.
3. Remove and wash the water reservoir, milk
reservoir, porta-filter, 2 filters and measuring
scoop in a mixture of mild detergent and
water. Rinse each thoroughly and place back
onto appliance.
NOTE: Porta-filter and water reservoir are NOT
dishwasher safe.
Step 2 - Prime the unit (must be completed
prior to first use)
1. Plug unit in and turn unit ON (“l”) using the
On/Off switch.
2. Fill water reservoir up to the “MAX” level
with water and place back on unit.
3. Fill milk reservoir up to the “MAX” level with
water and place back on unit. Be sure to
firmly push the milk reservoir into place until
Cappuccino and Latte buttons illuminate.
4. Place porta-filter in the unit ensuring it is
properly locked. For more instructions, refer
to the “Placing the Porta-Filter” section on
page 10 of this manual.
5. Place a large cup under porta-filter.
6. Aim the tip of the frothed milk dispensing
tube inside the cup.
7. Once all 3 lights on the control panel stop
pulsing and illuminated, press the Latte
"
" button twice brew double latte, the unit
stops automatically.
8. Once step 7 is complete, the 3 control panel
lights will remain illuminated indicating that
the unit is ready for use.
Loading ...
Loading ...
Loading ...