Loading ...
Loading ...
Loading ...
Controls and Features
Bar Refrigerator with Icemaker
Temperature
control
The temperature display shows the actual
temperature of the bar refrigerator with
icemaker. The actual temperature may vary
slightly from the set temperature based on
factors such as door openings, amount of
food and room temperature.
To change the temperature setting,
press the WARMER or COLDER pads until
you reach the desired set temperature.
After 5 seconds, the display will return to
the actual temperature.
After making adjustments, allow 12 to 24
hours for the bar refrigerator with icemaker
to reach the temperature you have set and
before making any further adjustments.
Temperature Settings
Minimum: 34°F (1.1°C)
Maximum: 45°F (7.2°C)
8
Unit ON/OFF
This pad stops cooling in the bar refrigerator
with icemaker, turns off the temperature
controls and removes power to the light circuit.
NOTE: The icemaker is on a separate on/off
switch. To remove power from the icemaker
See Automatic Icemaker section.
Press this pad for a minimum of 3 seconds
to turn the bar refrigerator with icemaker on
or off, or unplug the unit for long vacations
or absences, or when cleaning the unit or
changing the light bulb.
Glass
shelves
Tempered glass shelves in the bar
refrigerator with icemaker are removable for
easy cleaning or for storing larger items.
To remove a shelf, open the door
completely to avoid potential damage to
the gasket. Lift up on the back of the shelf
slightly. Tilt the shelf to one side at an angle
while pulling forward.
To replace a shelf, open the door completely
to avoid potential damage to the gasket.
Tilt the shelf to one side at an angle and
slide toward the back wall, placing one side
onto the shelf support. Place the other side
onto the opposite shelf support. Ensure rear
locking tabs are engaged. When installed
properly, the shelf will not slide forward
when gently pulled.
To remove, lift up on the back of the shelf Tilt the shelf at an angle while removing
or replacing
Place in slots when replacing the shelf
Appearance may vary
NOTE: The icemaker temperature is not displayed.
Child control
lockout
This child control lockout feature prevents
unwanted changes to your temperature
settings.
After the desired temperature is set, the
temperature can be locked. To lock, press
both the + and – pads at the same time for
five seconds. To unlock, press both + and –
pads for five seconds.
Loading ...
Loading ...
Loading ...