Loading ...
Loading ...
Loading ...
Adjusting the headlamp aim
IMPORTANT: Both the inboard and outboard vertical aim screws must
be turned the same amount in the same direction. Do NOT turn the
screws different amounts or in different directions.
Note: Do not finish the aiming procedure by turning the screws in the
counterclockwise screwdriver direction. If you are adjusting in the
counterclockwise screwdriver direction, overshoot the adjustment by one
full turn and then turn the screwdriver clockwise one full turn, so you
finish the adjustment in the clockwise direction and still line up with the
vertical aiming line. This applies to both screws.
2006 Low Cab Forward Truck (lcf)
Supplement
USA (fus)
Lights
44
Loading ...
Loading ...
Loading ...