Loading ...
Loading ...
Loading ...
Use the Boundary Strip
With the Boundary Strip, you can keep Robo away from any area
or item you do not want Robo to clean. the cleaner will recognize the
Boundary Strip and will not cross into the blocked-off area.
1. Identify the area or item you do not want the cleaner to get close to.
2. If necessary, use scissors to cut the Boundary Strip to a shorter length.
Be sure to correctly measure the length before cutting.
3. Apply the supplied strips of adhesive tape to lay the Boundary Strip
flat on the floor. Make sure the strip is placed FLAT on the floor or under
an area rug.
If the Boundary Strip is rolled up, remove and then
re-apply on the floor with adhesive tape. Otherwise
the Boundary Strip may not work well.
Make sure the Boundary Strip is placed on the same
surface plane the cleaner is used on.
Be careful not to damage the floor when using adhesive
tape. It is not recommended for use on carpets.
Keep the Boundary Strip away from objects that emit
excessive heat.
Loading ...