Loading ...
Loading ...
Loading ...
Operating the appliance en
17
Adding laundry
After starting the programme, you can
add or remove laundry:
1. Press the Start button to pause the
programme.
The Start button indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Note: Do not leave the washing
machine door open for too long
when adding laundry as water from
the laundry may leak out.
If, in the display panel:
– Both the YES and ¼ symbols
light up, it is possible to add
laundry.
– NO flashes, wait until the YES
and ¼ light up.
Do not open the washing
machine door until both the YES
and ¼ symbols are lit.
– NO lights up, it is not possible to
add laundry.
For safety reasons, the washing
machine door remains locked
when the water level or
temperature is high, or while the
drum is rotating, and it is not
possible to add laundry during
this time.
2. To continue the programme, press
the Start button.
Changing the programme
1. Press the Start button to pause the
programme.
2. Select a different programme.
3. Press the Start button again. The
new programme starts from the
beginning.
Cancel the programme
1. Press the Start button to cancel the
programme.
2. To cool the laundry: Set the
programme to Rinse.
3. Press the Start button again. The
rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end
‹ appears in the display panel and the
start button indicator lamp is off.
If the 9 symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Note: Add less detergent for the next
washing cycle with the same load.
Loading ...
Loading ...
Loading ...