Loading ...
Loading ...
Loading ...
Faults – what to do? en-us
31
3 Faults – what to do?
Fau l t s – wh a t to do?
Before you call customer service, use this table to check whether you can rectify the fault yourself.
Appliance
--------
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance" on page 20
If the temperature is too warm, check temperature again after a cou-
ple of hours.
If the temperature is too cold, check temperature again on the follow-
ing day.
Displays do not light up.
The power plug has not been inserted properly. Connect the power plug.
The fuse has tripped. Check the fuses.
The power has failed. Check whether the power is on.
Display indicates E….
The electronics have detected an error. Please contact customer service.
The alarm off button flashes and a warning signal sounds.
Press alarm off button. Alarm is switched off.
Refrigerator compartment, cool-fresh compartment or freezer com-
partment is open.
Close the appliance.
Ventilation openings have been covered. Clear the ventilation openings.
The temperature in the refrigerator compartment, cool-fresh compart-
ment or freezer compartment is too warm.
Press alarm off button. After the alarm off button is pressed, the
warmest temperature reached in the freezer compartment is dis-
played for 5 seconds. The display stops flashing.
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on. Start the appliance self-test.
~ "Appliance self-test" on page 33
When the program has ended, the appliance switches over to normal
operation.
Loading ...
Loading ...
Loading ...