Loading ...
Loading ...
Loading ...
6
voltage is the same of that shown on the rating label
of the unit and that the power socket and power supply
line correspond to the load specied.
- Check also the current capacity of your fuses. CONNECT
YOUR HEATER TO EARTH PROVIDED SOCKET ONLY.
Plug in the heater, the appliance will be set in the stand-
by condition. The display will show the symbol. Keep
loose clothing or bedding, furniture and ammable material
away from the power outlet where the heater is plugged in.
After an interruption of the power supply (power failure or
appliance unplugged) the unit goes always to stand-by.
Heating function
To turn the appliance on, press the
(B) button.
Press button (E) to set the required power level:
MIN ( ); MED ( ); MAX ( ) (see g. 2). To
select the desired temperature, press button + or - (C or D).
By pushing the + or - button once, the temperature (shown
on the display) will increase or decrease by
34°F (1°C).
Keeping the + or - button depressed the value will increase
o decrease rapidly.
The appliance allows to set the temperature from 41°F (5°C)
to 82°F (28°C).
Anti-freeze function
Setting the temperature to 41°F (5°C) with the "-" button,
the appliance will activate the Antifreeze function.
The display will show the symbol, in this way the appliance
will turn on automatically, at the max power, only if the room
temperature falls below 41°F (5°C).
If you wish to go back to the Heating function, press the
"+" button once. After an interruption of the power supply
(probe failure or appliance unplugged) the unit goes always
to stand-by.
Eco function
When this function is active the appliance automatically sets
the most appropriate power level to guarantee optimum
comfort while reducing energy consumption.
To activate this function press the "ECO" (F) button. The
display will show symbol. If the selected temperature
is much higher than the actual room temperature, the
appliance will start automatically and rapidly to heat the
room.
The appliance will automatically select the most convenient
power level (MAX-MED-MIN-OFF).
If MAX power level has been selected using the
button, the appliance will cycle between: MAX-MED-MIN-
OFF.
If MED power level has been selected, the appliance will cycle
between: MED-MIN-OFF.
If MIN power level has been selected, the appliance will cycle
between: MIN-OFF.
Working indicator
The symbol indicates the heating status by means of its
colors.
RED: the unit is heating at the maximum power.
ORANGE: the unit is heating at the medium power.
GREEN: the unit is heating at the minimum power.
absent: the unit is not heating.
Key lock
In order to avoid accidental operation, you can lock the
keyboard using the keylock function. To activate this function
during on mode, press buttons + and - together for at least
3 seconds. The display shows the symbol and a double
acoustic signal will be emitted. To disactivate the function
proceed in the same way.
Timer function
This function can be activated in two dierent ways.
Delayed start: With the appliance in standby mode, press
the timer button (G) . The hours left before the appliance
comes on is displayed together the symbol and "h"
symbol ashing (see g. 3). Change the hours using the +
and - buttons, then wait a few seconds for the program to
be stored. The display will return to o and the symbols
remains on. When the programmed time has elapsed, the
appliance will come on with the previous settings.
Delayed stop: with the appliance on, press the timer button
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...