Loading ...
Loading ...
Loading ...
Cooking with Auto-heat
When Auto-heat has been activated,
the burner automatically turns on at the
highest setting (heat-up boost) and
then switches to the previously selected
continued power level. The heat-up
time depends on which continued
power level has been chosen (see
chart).
With higher continued power levels only
a relatively short heat-up time is
required.
To activate Auto-heat
^ Touch the desired continued-cooking
number until a signal sounds, and the
selected continued power level starts
to flash.
During the heat-up time (see chart) the
continued power level flashes.
Changing the continued power level
deactivates Auto-heat.
With extended power levels (see
"Programming"), when an intermediate
power level is selected the power levels
before and after the intermediate power
level will flash.
To deactivate Auto-heat
You can turn off the heat-up boost
before the heat-up time ends.
^
Touch the continued power level until
the display stops flashing; or set a
different power level.
Continued
power level*
Heat-up time
(approx.) min:sec
1 1:20
1+ 2:00
2 2:45
2+ 3:25
3 4:05
3+ 4:45
4 5:30
4+ 6:10
5 6:50
5+ 7:10
6 1:20
6+ 2:00
7 2:45
7+ 2:45
8 2:45
8+ 2:45
9-
* The continued power levels 1+ etc.
are only available with the extended
power-level settings (see
"Programming").
Use
17
Loading ...
Loading ...
Loading ...