Loading ...
Loading ...
Loading ...
en Cleaning
36
Cleaning the metal mesh grease filters
Notes
■ Do not use aggressive, acidic or alkaline cleaning
products.
■ The metal grease filter can be cleaned in the
dishwasher or by hand.
By hand:
Note: You can use a special degreaser to remove
stubborn dirt (article no. 00311297). This can be
ordered through our online shop.
■ Soak the metal grease filter in hot soapy water.
■ Clean the metal grease filter with a brush and then
rinse it thoroughly.
■ Leave the metal grease filter to drain.
In the dishwasher:
■ Do not clean the metal grease filter together with
cookware if heavily soiled.
■ Place the metal grease filter in the dishwasher,
leaving plenty of space around it. Do not trap the
metal grease filter.
■ For best results, place the metal grease filter in the
dishwasher filter side down.
Fitting and cleaning other appliance components
Also clean the inside of the hob extractor system
regularly. You can use a special degreaser to remove
stubborn dirt (article no. 00311297).
1. Remove the filter cover and clean it with a damp
cloth.
2. Remove the metal grease filter and container.
3. Press down on the two catches on either side of the
container to separate the metal grease filter from the
container.
4. Empty the container if necessary.
5. Clean the metal grease filter and the container in the
dishwasher.
6. If required, take off the housing cover underneath
the appliance and clean it.
7. Clean the parts and dry them before refitting them.
Inserting the metal grease filters
1. Insert the container.
2. Insert the metal grease filter.
Note: Ensure that the metal grease filter has been
inserted correctly. Otherwise, the ventilation system
does not work.
3. Put the filter cover on.
Resetting the saturation displays
Once you have cleaned or replaced the relevant filters,
reset the saturation indicator so that the ”‚ ‹ and
”‚‚ indicators go out.
After switching off the appliance, ”‚‹ or ”‚‚ lights
up.
1. Touch the A symbol.
An audible signal sounds. The metal grease filter
saturation indicator has now been reset.
2. If ”‚‚ lights up, touch the A symbol again.
An audible signal sounds. The saturation indicator
for the activated charcoal filter is reset.
Loading ...
Loading ...
Loading ...