Loading ...
Loading ...
Loading ...
Operations
Operations
English34
Getting started
Using Dacor iQ Kitchen, you can control your dishwasher from your smart device
remotely. For improved performance, the content and design of the app is subject to
change without notice.
1. Launch the Dacor iQ Kitchen App on your smartphone.
2. If ‘Dish Washer’s’ is not listed, tap Add Device > Select other device > Dish Washer on
the app screen.
3. Press and hold Smart Control on your dishwasher’s control panel for more than
5 seconds until the ‘AP’ message appears on the display.
4. When the device registration is complete, turn on the Smart Control function on your
dishwasher and control your dishwasher remotely.
Delay Start
You can delay the cycle starting time up to 24 hours in 1-hour increments. To increase
the delay time, press Delay Start ( ). The hour displayed indicates the time at which the
cycle will start.
1. Open the door, and then load the dishwasher.
2. Press Delay Start ( ), and then press or hold Delay Start ( ) to change the time in
1-hour increments.
3. Close the door, and then press START.
NOTE
To change the delay time once the dishwasher has started, press POWER and restart the
dishwasher.
Control Lock
To prevent children from playing with the dishwasher, Control Lock locks all button
controls except for POWER.
• To activate Control Lock, press and hold Sanitize for 3 seconds. With Control Lock
activated, you cannot select a cycle or option, or start an operation.
• To deactivate Control Lock, press and hold Sanitize again for 3 seconds
• Control Lock remains active after the dishwasher restarts. To cancel Control Lock, you
must deactivate it rst.
• To add detergent or more items while Control Lock is active, you must deactivate
Control Lock rst.
DACOR_DW9500MD-00196A-00_EN.indd 34 4/25/2017 7:53:01 PM
Loading ...
Loading ...
Loading ...