Loading ...
Loading ...
Loading ...
Cleaning and maintenance
62
Installing and removing the seal
To remove the seal:
• Unhook the clips located in the 4 corners
and in the centre, then pull the seal
outwards.
To refit the seal:
• Hook the clips located in the 4 corners
and in the centre onto the seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
What to do if...
The appliance is not working.
• The switch is defective: check the fuse
box to see whether the switch is in
working order.
• Loss of power: check that the appliance
indicator lights are operational.
The gas burner does not light.
• Loss of power or moisture in the igniters:
light the gas burner with a lighter or
match.
The oven does not heat up.
• Defective fuse: check and replace the
switch if necessary.
• The function knob has not been set: set
the function knob.
All food prepared in the oven burns within
a short time.
• Defective thermostat: contact an
Authorised Service Centre
The door glass mists up when the oven is
hot.
• Completely normal behaviour caused by
the difference in temperature which has
no effect on the oven’s performance.
Loading ...
Loading ...
Loading ...