User manual Steam Cleaner

CAUTION: Do not add anything except cool water or you will cause damage to the heating element and void your warranty.
CAUTION: To reduce risk of injury from steam, never point product at people, animals, or electrical outlets.
NOTE: You may substitute distilled or demineralized water for tap water.
If your tap water contains a high level of mineral content (hard water) the use of distilled or demineralized water is recommended.
Do not add anything except cool water or you will cause damage to the heating element and void your warranty.
NOTE: Empty tank after each use.

Unwrap power cord before operating unit.
The red indicator light will go on when the unit is first plugged in. When the steamer is ready to use, the light will turn off.
Push to release steam.
Remove protective packaging from nozzle and extension hose prior to use.
CAUTION: Always unplug your Steam Shot before filling/refilling. Press trigger until Steamer depressurizes. Wait 5 minutes before removing cap. Be sure to use an oven mitt in case the cap is still hot.
CAUTION: Before disconnecting a tool from the steam cleaner, make certain that steam is no longer coming from the nozzle. Use an oven mitt to remove tools, or wait until they cool before removing.
The accessory nozzle can be attached directly to the steamer or the end of the extension hose.
The accessory nozzle and extension hose attach in the same manner. Align the arrow on the tool with the (I) mark on the Steam Shot and turn clockwise until the arrow aligns with the (II) mark on the steamer.
a. Extension hose
For cleaning hard to reach areas. Attach to unit and use with the accessory nozzle attached.

b. Accessory nozzle
Attach to unit or hose. Use alone or with a tool attached.

c. Detail brush tool
Attach to end of the accessory nozzle for scrubbing stubborn soil. Color coded for specific use.

d. Flat scraping tool
Attach to the end of accessory nozzle for removing wallpaper, gum and extra sticky messes.

e. Angle concentrator tool (select models only)
Attach to end of the accessory nozzle.

f. Grout brush tool
Attach to end of the accessory nozzle for scrubbing small cracks and crevices.

g. Fabric steamer tool
Attach to end of the accessory nozzle for refreshing and removing wrinkles on clothing or drapes. Attach cloth over tool.

h. Window squeegee tool
Hooks onto the fabric steamer tool (without cloth) for glass and window cleaning.

Accessories included vary by model. See page 11 to purchase additional accessories.
Stubborn soil that resists traditional hot water, cleaning solutions and vigorous scrubbing can often be effectively removed with high temperature steam. Baked-on grease on the stovetop, dried fruit juice in the refrigerator, stubborn soap scum on sliding shower doors, gum on countertops—steam makes all these far easier to clean. Use your Steam Shot to soften and remove stubborn dirt, grime, dry, hardened food, and other household soil from hard surfaces. You can also use your steam cleaner to clean pet cages.*
Note: Always remove pets before cleaning.
CAUTION: Keep face and all exposed skin away from steam. Failure to do so may result in personal injury.
CAUTION: Thermal shock can shatter glass. Before cleaning cold glass surface, carefully warm the surface by directing the steam jet on the glass from a distance of no less than 4 - 6”.
Use your Steam Shot to remove wrinkles from clothes, and “freshen” clothing that has been stored. Test for color fastness in a hidden area. If color is affected do not use.
Your Steam Shot is a very versatile tool. Use it to:
CAUTION: Never tilt the steamer more than 45° during use as boiling water could spill with the steam.
CAUTION: Never attempt this procedure on the clothing you are wearing. Burns could result.
CAUTION: Do not add anything except cool water or you will cause damage to the heating element and void your warranty.
WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
Reduce steam or no steam Possible Cause
1. Blocked steam nozzle.
2. Water tank may be empty.
Remedies
1. Unplug from outlet. After unit has cooled, clear blockage by inserting and removing a paper clip into the brass spray tip.
2. Unplug, allow to cool for 5 minutes and refill with water.
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your Steam Shot.
WARNING: To reduce the risk of fire, electric shock, or injury:
SAVE THESE INSTRUCTIONS FOR FUTURE USE THIS APPLIANCE HAS A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.
This model is for household use only.

Reference file: Bissell 39N7A Steam Shot Handheld Hard Surface Steam Cleaner
Series: 39N7 SERIES