Loading ...
Loading ...
Loading ...
Page |10
Toe-Kick
The Toe-Kick itself can be removed for service or
cleaning (see “Cleaning behind the Toe-Kick” in the
next section).
1. Remove the stainless steel Toe-Kick by unscrewing
and removing the two front screws with a Philips
screwdriver.
Front
screws
2. You can remove the Toe-Kick by simply pulling it
out of the left and right mounting brackets.
3. To reattach the Toe-Kick, slide over the left and right
mounting brackets, such that bottom tabs of the Toe-
Kick rest on top of the bracket bases. This will allow
the Toe-Kick and mounting bracket screw holes
to align.
Bracket
bases
Bottom
tabs
Cleaning the appliance
WARNING:
Never clean the appliance with a steam cleaner!
CAUTION:
• Do not use abrasive or acidic cleaning agents and
solvents.
• Do not use scouring or abrasive sponges. The
metallic surfaces could corrode.
• Never clean the glass shelves in the dishwasher. The
parts may be damaged.
Proceed as follows:
1. Before cleaning: switch the appliance off. For
instructions, see “Off Mode” section on the “Special
Functions” page.
2. Clean the appliance, and the glass shelves with a
soft cloth, lukewarm water and a little pH neutral
detergent.
3. Clean the appliance with a soft cloth,
lukewarm water and a little pH neutral detergent.
4. Wipe the drawer seals with clear water only and
then wipe dry thoroughly.
5. After cleaning switch the appliance back on.
CAUTION:
When rinsing the cabinet, water must not enter the
interior light recess located on the upper side of the
interior cabinet, or spill out from the bottom of the
cabinet.
Loading ...
Loading ...
Loading ...