User Manual Bosch WAR28568LW/01 Serie 6 Washing machine

Documents for Bosch WAR28568LW/01

User Manual

For WAR28568LW/01. Also, The document are for others Bosch models: XQG100 - WAR28560LW, XQG100 - WAR28568LW

• Your new washing machine2
  • GB standard:2
  • Display rules2
  • : Warning!2
  • Caution!2
  • Note/tip2
  • 1. 2. 3. / a) b) c)2
• Contentsen Instruction Manual and Installation Instructions3
  • 8 Intended use 43
  • ( Safety instructions 53
  • 7 Environmental protection 123
  • 5 Positioning and connecting 143
  • * Getting to know the appliance 233
  • Z Laundry 273
  • P Overview of programmes 283
  • 0 Programme default settings 333
  • \ Additional programme settings 343
  • 1 Operating the appliance 353
  • Q Appliance settings 403
  • H Sensors 414
  • 2 Cleaning and maintenance 414
  • 3 Faults and what to do about them 454
  • 4 After-sales service 504
  • [ Consumption values 514
  • J Technical data 514
  • 8 Intended use4
    • Intended use4
• Before you switch on the appliance:4
• Check that there is no visible damage to the appliance. Do not operate the appliance if it is damaged. Should you have any problems, please contact your specialist dealer or our customer service.4
• Read and follow the operating and installation instructions and all other information provided with this appliance.4
• Retain the documents for subsequent use or for subsequent owners.4
• ( Safety instructions5
  • Safety instructions5
  • The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings.5
  • It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.5
    • Children/people/pets5
  • : Warning5
    • Risk of death!5
  • : Warning5
    • Risk of death!5
  • : Warning6
    • Risk of suffocation!6
  • : Warning6
    • Risk of poisoning!6
  • : Warning6
    • Risk of burns!6
  • : Warning6
    • Eye/skin irritation!6
    • Installation6
  • : Warning6
    • Risk of electric shock/fire/ material damage/damage to the appliance!6
  • : Warning7
    • Risk of electric shock/fire/ material damage/damage to the appliance!7
  • : Warning7
    • Risk of fire/material damage/ damage to the appliance!7
  • : Warning7
    • Risk of injury/material damage/damage to the appliance!7
  • : Warning7
    • Risk of injury!7
    • Caution!8
      • Material damage/damage to the appliance8
    • Operation8
  • : Warning8
    • Risk of explosions/fire!8
  • : Warning9
    • Risk of poisoning!9
  • : Warning9
    • Risk of injury!9
  • : Warning9
    • Risk of scalding!9
  • : Warning9
    • Eye/skin irritation!9
    • Caution!9
      • Material damage/damage to the appliance9
    • Cleaning/Maintenance10
  • : Warning10
    • Risk of death!10
  • : Warning10
    • Risk of poisoning!10
  • : Warning10
    • Risk of electric shock/material damage/damage to the appliance!10
  • : Warning10
    • Risk of injury/material damage/damage to the appliance!10
  • Caution!11
    • Material damage/damage to the appliance11
• 7 Environmental protection12
  • Environmental protection12
  • Packaging/used appliance12
  • Dispose of packaging in an environmentally-responsible manner.12
  • Keep children away from the packaging materials and packaging materials are not toys.12
  • Reprocessing and reuse of packaging material saves raw materials, reducing waste.12
  • All packaging materials used are in line with environmental protection requirements and reusable.12
    • Name and content of hazardous substances in products12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
      • x12
      • Û12
      • Û12
      • Û12
      • Û12
      • Û12
        • Note:12
      • All of component parts in the BSH products that fall into the same category are covered in the table above, the component parts of this product depend on the actual situation. If you have any questions, please contact us by dialling the customer serv...12
        • Tips on economical use13
• 5 Positioning and connecting14
  • Positioning and connecting14
  • Included with the appliance14
    • Note:14
  • Check the appliance for transport damage. Never use a damaged appliance. If you have any complaints, contact the dealer from whom you purchased the appliance or our customer services.14
  • Bag:14
  • * Depending on the model14
  • In addition14
  • a hose clamp (24 - 40 mm diameter, available from specialist dealers) is required to connect the water drain hose to a siphon.14
    • Useful tools14
    • Installation14
      • Note:14
    • Humidity in the drum is caused by the final inspection.14
      • Safety instructions14
  • : Warning14
    • Risk of injury!14
  • Caution!15
    • Damage to the appliance15
  • Caution!15
    • Water damage15
      • Notes15
    • Removing the foam block15
    • This appliance is secured with a foam block, which has to be removed before using the appliance for the first time. If in doubt, please contact specialist.15
  • Caution!15
    • Damage to the appliance15
  • : Warning15
    • Risk of injury/damage to the appliance!15
      • Note:15
    • Remove the foam block first before you remove the transport locks.15
      • 1. Remove the foam block.15
        • a) Tilt the appliance to the rear.15
    • b) Remove the foam block and bottom pad.15
    • 2. Fit the bottom cover. (You can find it in the drum)16
      • Note:16
      • Installation surface16
        • Note:16
      • The appliance must be stable aligned so that it does not move around.16
        • Installation on a base or a wooden joist floor16
  • Caution!16
    • Damage to the appliance16
      • Note:16
    • On wooden joist floors, install the appliance:16
      • Installation on a platform with drawer16
    • Platform order no.: WMZ20530W, WMZ20530S, WMZ20530G.16
      • Installing the appliance in a kitchenette16
  • : Warning16
    • Risk of death!16
      • Notes16
    • Removing the transport locks16
  • Caution!16
    • Damage to the appliance16
      • Note:16
    • Keep the screws and sleeves in a safe place.16
      • 1. Take the hoses out of the holders.17
    • 2. Unscrew and remove all four transport brace screws.17
      • a) Remove the mains cable from the holders.17
      • b) Remove the sleeves.17
    • 3. Fit the covers.17
    • 4. Lock the covers firmly in place by applying pressure to the snap-in hooks.17
      • Hose and cable lengths18
      • Connection on left side18
      • or18
      • Connection on right side18
        • Note:18
        • If the hose holders are used, the possible hose lengths are reduced!18
          • Available from dealer/customer service:18
          • Water inlet18
  • : Warning18
    • Risk of death!18
      • Notes18
    • Optimum water pressure in the supply network18
    • At least 0.1 MPa (1 bar)18
    • Maximum 1 MPa (10 bar)18
      • Notes18
    • Connection19
      • Connect the water supply hose to the tap (26.4 mm = ¾"):19
        • Note:19
        • Turn on the tap carefully, checking the leak tightness of the connection points. The screw connection is under mains water pressure.19
          • Water outlet19
  • : Warning19
    • Risk of scalding!19
  • Caution!19
    • Water damage19
  • Caution!19
    • Damage to the appliance/fabrics19
      • Notes19
    • Connection19
      • Note:19
      • Note:19
      • Note:20
      • Alignment20
      • Level the appliance using a spirit level.20
      • Incorrect levelling may result in intense noise, vibrations and "wandering".20
        • 1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction.20
      • 2. Check the alignment of the appliance with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.20
      • 3. Tighten the lock nut against the housing.20
        • Electrical connection20
    • Electrical safety20
  • : Warning20
    • Risk of electric shock!20
    • Before washing for the first time21
    • The appliance was inspected thoroughly before leaving the factory. To remove any residual test water, run the Drum Clean programme the first time without laundry.21
      • Note:21
        • 1. Insert mains plug.21
    • 2. Turn the water tap on.21
    • 3. Press the # button till the indicator lamp lights up, release the button. The appliance is switched on.21
    • 4. Close the door. Do not load any laundry.21
    • 5. Select the Drum Clean 90°C programme.21
    • 6. Open the detergent drawer.21
    • 7. Pour approx. 1 litre of water into dispenser II.21
    • 8. Add standard detergent to dispenser II according to manufacturer’s instructions for light soiling.21
      • Note:21
    • 9. Close the detergent drawer.21
    • 10. Select A.21
    • 11. When the programme ends, press the # button till the indicator lamp turns off, release the button.21
      • Transportation21
      • e.g. when moving home21
        • Preparatory work:21
          • 1. Turn off the water tap.21
    • 2. Reduce the water pressure in the supply hose. ~ Page 4421
    • 3. Drain any residual water. ~ Page 4321
    • 4. Disconnect the appliance from the mains.21
    • 5. Remove the hoses.21
    • 6. Empty the dispensers. ~ "Emptying the detergent draw, cleaning the detergent drawer and its housing" on page 42 and ~ "Cleaning the measuring aid A for liquid detergent" on page 4221
      • Installing the transport locks:22
        • 1. Remove the covers and keep them in a safe place.22
        • Note:22
    • 2. Insert all four sleeves.22
      • a) Clip the hoses securely in the holders.22
      • b) Clip the mains cable securely in the holders.22
      • c) Insert and tighten the screws.22
      • Before switching on the appliance again:22
        • Notes22
• * Getting to know the appliance23
  • Getting to know the appliance23
  • Appliance23
  • Control panel24
  • Touch-Display25
    • Indicators and buttons on the control panel25
    • Setting25
    • Note:26
      • Other indicators26
      • Information on26
  • Z Laundry27
    • Laundry27
    • Protecting your laundry and appliance27
    • Caution!27
      • Damage to the appliance/textiles27
      • The following instructions must be observed when preparing your laundry:27
        • Sorting laundry27
      • Sort your laundry according to the care instructions and manufacturer's information on the care labels, depending on:27
        • Note:27
  • P Overview of programmes28
    • Overview of programmes28
    • Selectable programme28
      • Programme/Type of washing28
      • Options/Information28
      • Notes30
      • Notes32
  • 0 Programme default settings33
    • Programme default settings33
    • You can change the default settings for selected programmes. The settings can be changed even while the selected programme is running. The effects depending on the progress of the programme.33
      • Temperature33
    • Before and after the programme starts, you can change the set temperature depending on how far through the programme the appliance is.33
    • The maximum temperature that can be set depends on the programme that has been selected.33
      • Spin speed33
    • Depending on what stage the programme is in, you can change the spin speed (in rpm; revolutions per minute) before and during the programme.33
    • setting 2: 2=”No spin”. The water is only drained.33
    • You can select “No spin” to prevent creasing if the laundry will not be taken out of the appliance immediately after the programme has ended.33
    • The maximum speed that can be set depending on the model and the programme that has been selected.33
      • Finish in time33
    • Before starting the programme, you can preselect the programme end ("Finish in" time) in 0.5h increments (h = hour) up to a maximum of 24 hours.33
      • To do this:33
        • 1. Select a programme (except MyTime programme).33
    • 2. Select the ˜ button repeatedly until the required number of hours is displayed.33
      • Note:33
    • 3. Select the A button.33
      • Note:33
      • The length of the programme is automatically adjusted when the programme is running. Changes to the programme default settings or programme additional settings may also change the programme duration.33
      • After starting the programme (if a “Finish in” time has been selected and the programme has not yet started), you can change the preselected number of hours as follows:33
        • 1. Select the A button.33
    • 2. Touch the ˜ or ~ button to change the number of hours.33
    • 3. Select the A button.33
  • \ Additional programme settings34
    • Additional programme settings34
    • Note:34
    • You can find possible additional programme settings in the overview; these differ depending on the model.34
    • By selecting additional programme settings, you can better adapt the washing process to your items of laundry.34
    • The settings can be selected or deselected depending on the progress of the programme.34
    • The button indicator lamps light up if a setting is activated.34
    • The settings are not retained after the appliance is switched off.34
      • 油渍 (Butter/Oil)/酒渍 (Red Wine)/酒渍 (Red Wine)/草渍 (Grass)34
        • Types of stain that can be selected:34
    • Do not let stains dry. Remove solid substances beforehand.34
      • Select a programme with a stain type:34
        • 1. Arrange items of washing as usual.34
    • 2. Select a programme.34
    • 3. Select a stain type (depending on the selected programme).34
    • 4. Start the programme.34
      • 提速 (Speed)34
      • Washing in a shorter time while achieving a washing result that is consistent with, but uses more energy than the selected programme without the 提速 (Speed) setting.34
        • Note:34
        • Do not exceed the maximum load.34
          • 节电 (Eco)34
      • Energy-optimised washing by reducing the temperature while achieving a washing result that is consistent with the selected programme without the 节电 (Eco) setting.34
        • 轻松熨 (Easy iron)34
      • Reduces creasing by means of a special spin sequence followed by fluffing and reduced spin speed.34
      • Touch 轻松熨 (Easy iron) and activate or deactivate it.34
        • Note:34
        • If 轻松熨 (Easy iron) has been activated, the laundry will have retained a higher than average level of moisture after spinning.34
          • 带预洗 (Prewash)34
      • Prewash for heavily soiled laundry.34
      • Touch 带预洗 (Prewash) to activate or deactivate it.34
        • Note:34
        • Put the detergent into dispenser I and II.34
          • 高水位 & 加漂洗 (Water plus & Rinse plus)35
      • Settings that can be selected:35
      • Additional rinse cycles for particularly sensitive skin and/or for areas with very soft water.35
      • Longer programme duration.35
      • The number of rinse cycles that the appliance actually runs depends on the number that is set as a basic setting for the program in question.35
      • Meanwhile the water level is raised during washing and each rinse for better soaking performance and gentler treatment of the laundry.35
        • 免排水 (Rinse hold)35
      • The laundry remains in the rinsing water after it has been washed.35
      • Touch 免排水 (Rinse hold) and activate or deactivate it.35
        • Note:35
        • If you have selected 免排水 (Rinse hold), the laundry remains in the rinsing water after it has been washed. You either have to spin the laundry or drain the water in order to end the programme. Only then can you remove the laundry.35
          • 记忆 (Memory)35
      • You can save a selected programme with your favourite settings here.35
        • To store:35
          • 1. Switch on the appliance.35
    • 2. Select a programme.35
    • 3. If required, change the programme default settings and/or select programme additional settings.35
    • 4. Touch and hold 记忆 (Memory) button for approx. three seconds.35
      • Calling up: touch 记忆 (Memory) button briefly after you switch on the appliance.35
      • Reset: touch and hold 记忆 (Memory) button again for approx. three seconds after selecting the new programme and settings.35
  • 1 Operating the appliance35
    • Operating the appliance35
    • Preparing the appliance35
    • The appliance was tested before delivery. To remove residual water from the test procedure, the first wash cycle should be run without laundry using the Drum Clean programme. ~ "Before washing for the first time" on page 2135
      • Notes35
        • 1. Insert mains plug.35
        • : Warning35
        • Risk of death from electric shock!35
    • 2. Turn the water tap on.36
    • 3. Open the appliance door.36
      • Switching on the appliance/ selecting a programme36
      • Press the # button till the indicator lamp lights up, release the button. The appliance is switched on.36
      • The Cottons programme, which is preset at the factory, is then always displayed.36
      • You can use this programme or select a different programme.36
        • Note:36
        • If you have activated the childproof lock, you must deactivate it before you can set a programme.36
      • Presettings and maximum load are indicated on the Touch-Display for the selected programme.36
      • You can use the displayed presettings or adjust the selected programme optimally to the items of washing by changing the ~ "Programme default settings" on page 33 and/or selecting ~ "Additional programme settings" on page 34.36
        • Placing laundry into the drum36
      • Insert the laundry.36
      • Close the door.36
        • Notes36
        • Measure and add detergent and care products37
    • Caution!37
      • Damage to the appliance37
      • Dosing37
      • Dose the detergents and care products according to:37
      • Filling the dispensers37
        • 1. Pull out the detergent drawer.37
        • : Warning37
        • Eye / skin irritation!37
      • 2. Pour in detergent and/or cleaning product.37
        • Notes37
        • Measuring aid A* for liquid detergent38
        • *depending on the model38
          • Position the measuring aid A for measuring the correct amount of liquid detergent:38
            • 1. Pull out the detergent drawer. Insert the liquid detergent container into dispenser II for main wash.38
      • 2. Pour liquid detergent into liquid detergent container and do not exceed the Maximun mark.38
      • 3. Close the detergent drawer.38
        • Note:38
        • Do not use the viscous liquid detergent.38
          • Starting the programme38
        • Touch and hold A button for 1~2 seconds, then release the button. The programme starts and the appliance door is locked.38
        • The Finish in time is shown in the Touch- Display and counts down until the programme starts. After the programme has started, the programme duration is displayed. And the displays for the programme's progress light up. ~ "Touch-Display" on page 2538
          • Note:38
          • Foam detection38
          • If the symbol Å also lights up in the Touch-Display, the appliance has detected too much foam during the wash cycle and automatically activated additional rinse cycles to remove the foam.38
        • If you want to lock the programme to prevent it from being adjusted inadvertently, you can select the childproof lock.38
          • Childproof lock38
        • You can lock the appliance to prevent the functions you have set from being changed inadvertently. To do this, activate the childproof lock.38
        • Touch and hold the E 3 秒 button to activate/deactivate the childproof lock.38
        • To activate the childproof lock:38
        • After the programme starts, Touch and hold the E 3 秒 button for 3 seconds.38
          • Note:38
          • When the programme ends, End is displayed. The door is closed. E 3 秒 and Õ remain on to remind you to deactivate the childproof lock.38
        • To deactivate the childproof lock:38
        • Touch and hold the E 3 秒 button until the E 3 秒 indicator lamp is off.38
          • Adding/removing laundry38
        • After starting the programme, you can add or remove laundry if necessary.38
        • Touch the A button. The appliance checks whether reloading is possible.38
        • If the following appears on the Touch- Display:38
        • To continue the programme, touch the A button. The programme continues automatically.39
          • Notes39
          • Changing the programme39
          • If you have started the wrong programme by mistake, you can change the programme as follows:39
            • 1. Touch the A button.39
      • 2. Select another programme.39
      • 3. And touch the A button again. The new programme starts from the beginning.39
        • Cancel the programme39
        • For programmes at high temperatures:39
          • 1. Touch the A button.39
      • 2. To cool down laundry: Select Rinse.39
      • 3. Touch the A button.39
        • For programmes at low temperatures:39
          • 1. Touch the A button.39
      • 2. Select Spin.39
      • 3. Touch the A button.39
        • Programme end39
        • End lights up on the Touch-Display and A and Õ displays are off.39
          • Removing laundry/switching off the appliance39
            • 1. Press the # button till the indicator lamp turns off, release the button. The appliance is switched off.39
      • 2. Open the door and remove the laundry.39
      • 3. Turn off the water tap.39
        • Note:39
        • Notes39
  • Q Appliance settings40
    • Appliance settings40
    • You can change the following settings in the control and display panel:40
    • You will need to activate the setting mode in order to change these settings.40
      • Activating the setting mode40
        • 1. Switch on the appliance. The settings for the current programme are displayed.40
    • 2. Touch the 设置 (Setting) button.40
      • You can now change the settings:40
        • Changing the signal volume40
      • To do this, touch ˜ or ~ on the touch display until the required adjustment value for the volume of the information signals appears:40
        • Adjustment values:40
      • Exit setting mode or:40
      • Touch 设置 (Setting) button again. The display for the operating signals C and the preset volume light up.40
      • Touch ˜ or ~ to change the adjustment value (as above).40
      • Exit setting mode or:40
        • Changing the brightness of the touch display40
      • Touch 设置 (Setting) button again. The display for the touch display's brightness B and the preset brightness light up.40
      • Change the adjustment value by touching ˜ or ~:40
        • Adjustment values:40
      • Exit setting mode or:40
        • Switching the drum-care information signal on/off40
      • Touch 设置 (Setting) button again. The display for switching the drum care information on/off Û lights up.40
      • Touch ˜ or ~ to switch on or switch off the drum care information.40
        • Exiting setting mode40
          • To exit and save the settings:40
  • H Sensors41
    • Sensors41
    • Unbalanced load detection system41
    • The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning.41
    • If the laundry is extremely unevenly distributed, the spin speed is reduced or the spin cycle is not performed for safety reasons.41
      • Note:41
      • Place large and small items of laundry evenly in the drum.41
  • 2 Cleaning and maintenance41
    • Cleaning and maintenance41
    • : Warning41
      • Risk of death!41
    • Caution!41
      • Fire and explosion hazard!41
    • Caution!41
      • The appliance may be damaged!41
      • Appliance housing/control panel41
      • Drum41
      • Use chlorine-free cleaning agents, do not use steel wool.41
      • If there are odours in the appliance, or to clean the drum, run the Drum Clean 90°C programme without laundry.41
        • Descaling41
      • Descaling should not be necessary if the detergent is measured out correctly. However, if it is required, follow the manufacturer's instructions for the descaling agent. Suitable descalers can be obtained via our website or from customer services.41
        • Emptying the detergent draw, cleaning the detergent drawer and its housing42
        • If the appliance contains detergent or fabric softener residues:42
          • 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.42
      • 2. To remove the insert: Push the insert upwards from below with your finger.42
      • 3. Clean the detergent dispenser tray and insert with water and a brush, and dry it. Clean the inside of the housing as well.42
      • 4. Fit the insert and lock it in place (push the cylinder onto the guide pin).42
      • 5. Push in the detergent drawer.42
        • Note:42
        • Leave the detergent drawer open so that any residual water can evaporate.42
          • Cleaning the measuring aid A for liquid detergent42
        • If it contains liquid detergent residue:42
          • 1. Hold the mearsuring aid, pull the cover upward and disconnect them.42
      • 2. Clean the measuring aid and cover with water and brush.43
      • 3. Install the cover back to the measuring aid. Pay attention to the assemble mark, and press the cover until click sounds.43
        • Note:43
        • Drain pump is blocked43
          • Note:43
        • Turn the water tap off to prevent more water from flowing in and to ensure that it is drained via the pump.43
    • : Warning43
      • Risk of scalding!43
        • 1. Switch off the appliance. Pull out the mains plug.43
      • 2. Open the service flap.43
      • 3. Take the drain hose out of the retainer.43
      • 4. Carefully unscrew the pump cover; residual water may leak out.43
      • 5. Refit and screw on the pump cover. The handle must be in a vertical position.44
      • 6. Close the service flap.44
        • Note:44
        • To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into dispenser II and start the Rinse or Spin programme.44
          • The drain hose at the siphon is blocked44
            • 1. Press the # button. Pull out the mains plug.44
      • 2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.44
      • 3. Clean the drain hose and siphon connecting piece.44
      • 4. Re-attach the drain hose and secure the connection point using the hose clamp.44
        • Filter in the water supply is blocked44
        • Release water pressure in the supply hose:44
          • 1. Turn off the water tap.44
      • 2. Select any programme (except Rinse and Spin programmes).44
      • 3. Select the A button. Allow the programme to run for approx. 40 seconds.44
      • 4. Press the button #.44
      • 5. Pull out the mains plug.44
        • Clean the filters:44
          • 1. Disconnect the hose from the rear of the appliance.44
      • 2. Use pliers to remove the filter.45
      • 3. Clean the filter with a small brush.45
      • 4. Connect the hose and check for leaks.45
  • 3 Faults and what to do about them45
    • Faults and what to do about them45
    • Emergency release45
    • E.g. power outage or in the event of a loss of power45
    • The programme continues when the power supply is restored.45
      • However, if the laundry has to be removed, the appliance door can be opened as follows:45
    • : Warning45
      • Risk of scalding!45
    • : Warning45
      • Risk of injury!45
    • Caution!45
      • Water damage!45
        • 1. Press the # button. Pull out the mains plug.45
      • 2. Open the service flap.46
      • 3. Drain the water. ~ Page 4346
      • 4. Pull the emergency release downwards with a tool and release.46
        • Information on the display panel46
          • Display46
          • Cause/Remedy46
          • Notes47
        • Faults and what to do about them47
          • Faults47
          • Cause/Remedy47
          • Note:49
  • 4 After-sales service50
    • After-sales service50
    • If you cannot rectify a fault yourself, (~ "Faults and what to do about them" on page 45), please contact our after- sales service.50
    • We will always find an appropriate solution to avoid unnecessary visits by engineers.50
    • Please provide the after-sales service with the product number (E-Nr.) and the production number (FD) of the appliance.50
    • You can find this information (depending on the model):50
    • Trust the expertise of the manufacturer. Contact us. By doing so, you can be sure that the repairs are carried out by trained service personnel using genuine spare parts.50
  • [ Consumption values51
    • Consumption values51
  • J Technical data51
    • Technical data51