Loading ...
Loading ...
Loading ...
English - 16
freezer ice bin if you need more ice cubes.
• If ice doesn’t come out, pull out the ice bucket
and press the test button located on the right
side of ice maker. See the illustration below.
• Do not press the test button continuously
when the tray is filled with ice or water. Water
may overflow or ice may jam the bucket.
Making Ice
• To fill the ice bucket to maximum capacity after
installation, follow these steps:
1. Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to
cool properly.
2. Dispense 4 to 6 ice cubes into the glass.
3. After 8, and then 16 hours, dispense a full
glass of ice.
• When you press the Test button on the
icemaker, you will hear the refrigerator chime
(ding-dong). When the chime sounds, release
the Test button.
• The chime sounds automatically again to let
you know the ice maker is working well.
If you want to remove the ice cubes without
using the ice bucket, please turn the ice
maker off. (However, remove the front cover
from the ice maker.) The ice cubes in the
ice maker can spill out over the drawer.
Do not put food in the ice bucket. If you store
food in the ice bucket, the food may get in the
way of the ice maker while opening/closing
the door, causing damage to the ice maker.
Note that the ice cubes in the ice bucket
may spill out over the drawer when
removing the ice bucket from the drawer.
If this is the case, be sure to clear the ice
cubes that spilled out of the drawer.
If a power failure occurs, ice cubes may
melt then freeze together when the power
comes back on, causing the dispenser to
be out of order.
To prevent this problem, after a power failure, pull out
the ice bucket and discard the residual ice or water.
If you use all the ice at once, you must
repeat Steps 2 and 3 above.
However, only wait 8 hours before dispensing the
first 4 to 6 ice cubes. This will replenish the ice
cubes and ensure maximum ice production.
Using the ice off Function
When you select the Ice Off mode, remove all ice
cubes from the bucket. If you leave the ice cubes
in the bucket, the ice cubes may clump together,
making it difficult to remove them. To remove
the ice bucket safely and avoid injury, hold the
bottom of the bucket with one hand and the side
of the bucket with the other. Then, lift up on the
ice bucket, and pull it straight out. To put the ice
bucket back in, push it firmly straight back.
If the ice bucket is not pushed firmly into
place, ice in the bucket can melt.
If the bucket does not fit, turn the helix 90 degree
(see the last illustration on the right, below) and try
again.
• The inside of the ice bucket is very cold
when the refrigerator is operating.
Do not reach deep inside the ice bucket.
• Use only the ice maker provided with
the refrigerator. The water supply to
this refrigerator must only be installed/
connected by a suitably qualified person.
Connect to a potable water supply only.
• To operate the ice maker properly, water
pressure of 20 ~ 125psi is required.
Going on vacation...
If you have a long vacation or business trip and won’t
use the water or ice dispensers for a long time:
- Close the water valve. Otherwise, water
leakage may occur.
- Remove all food and ice in the ice bucket.
- Unplug the refrigerator.
- Wipe excess moisture from inside and leave
the doors open. Otherwise, odor and mold
may develop.
Ice Maker Do’s and Don’ts
Do not put your fingers, hands or any other
unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material
damage. Never put your finger or any other
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
check the
water level
Test button
DA68-02603A-10.indb 16 2015. 11. 5. �� 5:02
Loading ...
Loading ...
Loading ...