Loading ...
Loading ...
Loading ...
Care and storage
59
(2) Clean the watercraft. (See page 56 for in-
formation on cleaning the watercraft.)
Wax the hull with a non-abrasive wax
such as Yamaha Silicone Wax.
EJU40784
Lubrication
Use a Yamaha Power Cable Luber and spray
Yamaha Lube-Zall between the inner and out-
er cables to lubricate the cables and purge out
any dirt and moisture.
To keep moving parts sliding or rotating
smoothly, lubricate them with water-resistant
grease.
● Throttle cable (carburetor end) and choke
cable (carburetor end)
● Throttle cable (throttle lever end)
Squeeze the throttle lever and remove the
seal. Spray Yamaha Lube-Zall into the out-
er cable. Refit the seal securely.
● Steering cable ball joint (handlebar end)
and steering cable inner wire (handlebar
end)
To access the steering cable ball joint (han-
dlebar end) and steering cable inner wire
(handlebar end), remove the steering pole
cover. (See step 1 in “Adjusting the jet
thrust nozzle angle” on page 62 for informa-
tion on removing the steering pole cover.)
Recommended water-resistant grease:
YAMALUBE MARINE GREASE
1 Seal
UF2F13E0.book Page 59 Thursday, June 17, 2010 1:41 PM
Loading ...
Loading ...
Loading ...