Loading ...
Loading ...
Loading ...
4
7
41
6
CONTROL PANEL AND FEATURES
2
LOAD SIZE
Select the setting most suitable for your load. Small will add
a low amount of water for smaller loads and Super will add
the most amount of water for large or bulky loads. Items need
to move freely. Tightly packing can lead to poor cleaning
performance, and may increase wrinkling and tangling.
WASH TEMP
Temperature senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and soils
being washed. For best results and following the garment label
instructions, use the warmest wash water safe for your fabric.
■ On some models and cycles, warm and hot water may be
cooler than your previous washer.
■ Even in a cold and cool water wash, some warm water may
be added to the washer to maintain a minimum temperature.
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
Knob does not advance during the progress of the cycle, see
cycle status lights for each stage of the process. See “Cycle
Guide” for detailed descriptions of cycles.
SOIL LEVEL
For most loads, select the most suitable setting for your load.
For heavily soiled and sturdy fabrics, select Heavy Soil Level
for more wash time, if needed. For lightly soiled and delicate
fabrics, select Light Soil Level for less wash time, if needed.
Lighter soil level setting will help reduce tangling and wrinkling.
OPTIONS
The following options may be added to most cycles.
ONE RINSE
This option is used to limit a cycle to one rinse.
EXTRA RINSE
This option can be used to automatically add a second rinse
to most cycles.
ONE RINSE with FABRIC SOFTENER
This option must be selected if using fabric softener during
a cycle. It ensures that fabric softener is added at the correct
time in the rinse for even distribution.
1
2
3
4
EXTRA RINSE with FABRIC SOFTENER
This option turns on both the Fabric Softener and the
Extra Rinse options.
START/PAUSE/UNLOCK BUTTON
Press to start the selected cycle; press again to pause the cycle
and unlock the lid.
NOTE: If the washer is spinning, it may take several minutes to
unlock the lid. Press and hold for 3 seconds to cancel a cycle.
CYCLE STATUS LIGHTS
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that are
different from traditional washers.
FILL
When the START/Pause/Unlock button is pressed, the
washer will fill to the selected water level. If the lid is closed
when the washer is done filling the lid will lock and the
washer will begin operation.
If the lid is open when the water stops entering the washer,
the cycle will not begin until the lid has been closed and the
START/Pause/Unlock button is pressed. If the cycle has not
been started within 10 minutes of the water filling the washer,
the washer will pump out the water.
NOTE: Avoid opening lid during sensing phase. The sensing
process will start over when the washer is restarted. The
sensing light may also come on during the Soak and Wash
portions of the cycle. This is normal. To restart the washer
after the lid has been opened press START.
WASH
You will hear the agitator moving the load. The motor sounds
may change at different stages in the cycle. The wash time is
determined by the selected soil level.
5
Not all features and options are available on all models.
Appearance may vary.
3 5
6
7
Loading ...
Loading ...
Loading ...