Loading ...
Loading ...
Loading ...
Operating Instructions
Operating Instructions
(continued)
TO TURN UNIT OFF:
.devreser sthgir llA.cnI ,stcudorP emoH xulortcelE 9002
YOU WILL SEE:
DO THIS:
PRESS
ON/OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
Note: If the unit is turned off in heat mode (if applicable) or
fan only mode, it will return to the same setting when it is
turned on again. When the unit is turned off in cool or energy
saver(econ) mode, it will run in energy saver(econ) mode
when it is turned on again, but the setting of temperature
and fan speed will remain.
YOU WILL SEE:
°F
on·off fan speed sleep
ilter
reset
f
auto
hi
med
lo
°C
on·off fan speed sleep
ilter
reset
f
auto
hi
med
lo
°F
on·off fan speed sleep
ilter
reset
f
auto
hi
med
lo
on·off fan speed sleep
ilter
reset
f
auto
hi
med
lo
If the display reads "ES" , a sensor has failed. Contact your
Authorized Frigidaire Service Center.
FAULT CODES:
°F
on·off fan speed sleep
ilter
reset
f
auto
hi
med
lo
Loading ...
Loading ...
Loading ...