Loading ...
Loading ...
Loading ...
17
PAge heAder.....
ASSEMBLY & OPERATION
If this error occurs, turn the speed control
dial to the OFF position, switch the
appliance off at the power outlet and unplug
the cord. Wait at least 15 minutes before
restarting the mixer.
DISASSEMBLING THE MIXER
1. When mixing is complete, turn the
speed control dial to the OFF/STANDBY
position, switch the appliance off at the
power outlet and unplug the cord.
2. Remove splash guard if assembled.
Separate pour spout then slide main
ring out of position.
3. Raise the mixer motor head by
depressing the tilt back button and lift
the mixer motor head up until it tilts
back and locks into the open position.
4. Remove the beater/dough hook/whisk
attachment by holding the mixer motor
head and pressing the attachment
upwards on the spindle. Turn the
attachment anticlockwise to release it
from the pin on the spindle.
5. Use a soft plastic spatula to remove
mixture from the beater, dough hook or
whisk attachment.
NOTE
When lowering or lifting the mixer,
always support the motor head with
your other hand to prevent from
free-falling.
6. Remove the mixing bowl from the
indented bowl locking recess of the
mixer base and turn anti-clockwise until
the bowl releases. Use a soft plastic
spatula to remove mixture from the
mixing bowl.
7. Lower the mixer motor head by
pressing the RELEASE button and
pushing the mixer motor head down
until it locks into the horizontal
(closed) position.
WARNING
Avoid contact with beater/dough hook/
whisk during operation. Keep hands,
hair, clothing, spatulas and other
utensils away from beater/dough hook/
whisk to prevent personal injury or
damage to the mixer.
Loading ...
Loading ...
Loading ...