Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Ice Maker Performance Mode Instructions (cont’d)
Performance Mode Instructions Suitable situation Operation instruction
Manual drainage
system mode
(If you’re operating
using the “Manual
drainage system
mode”, ice water
will restrict drain
water from flowing
out.)
Manually drain the
water from the ice
bin.
There is no drain hole
in the room.
Ref.: Fig. A, Fig. B & Fig. C
Screw Nut and Switch
Condition
screw nut (front) (3) + seal washer (front) (4)
lock
screw nut (back) (7) + seal washer(back) (6)
lock
screw nut for valve seal (11)
lock
screw nut for valve seal (12)
lock
force water outlet switch (8)
OFF
1. Please be sure the screw nut and switch are in
the above condition to avoid water leakage.
2. Periodically check the ice bin (1), and water
level indicator (5). If the water level exceeds the
indicator water level, please drain off the excess
water.
3. When draining off the water, you can remove
the ice bin (1), screw nut (front) (3) and seal
washer (front) (4). Remove the excess water,
then tighten the above screw and seal washer.
OPERATING INSTRUCTIONS
The Ice Maker should be placed where the ambient temperature is between 10-32°C (50-90°F). If the
ambient temperature is above or below this range, the performance of the unit may be affected.
8
CONTROLS OF THE ICE MAKER
Loading ...
Loading ...
Loading ...