Loading ...
Loading ...
Loading ...
17
INSTALLING LEVELING LEGS, COIN SLIDE, AND COIN BOX
The coin slide mechanism, control panel lock and key, and
coin box lock and key are not included and are available from
usual industry sources. A special coin slide extension must be
used on this model and can be purchased from the coin slide
distributor.
1. Prepare dryer for leveling legs
Slide dryer onto cardboard or hardboard before moving
to avoid damaging oor covering.
Using two or more people, move dryer to desired installaon
locaon.
Take tape o front corners of dryer. Open dryer and remove
the literature and parts packages. Wipe drum interior with
damp cloth to remove any dust.
Take two cardboard corners from the dryer carton and place
them on the oor in back of the dryer. Firmly grasp body of the
dryer and gently lay it on its back on the cardboard corners.
2. Screw in leveling legs
Examine leveling legs and nd diamond
marking. Screw legs into leg holes by
hand. Use an adjustable wrench or
1" (25 mm) hex-head socket wrench to
nish turning legs unl diamond marking
is no longer visible. Then t a covered foot
boot over each leg foot.
To protect the oor, use a large piece of cardboard from the
dryer carton. Stand dryer up on the cardboard. Slide the dryer
unl it is close to its nal locaon. Leave enough room for
electrical connecon and to connect the exhaust vent.
Remove the service door of the meter case by liing it up
at the back. Install the money-accepng device. (Refer to
manufacturer’s instrucons for proper installaon.)
Replace the meter case service door. Put the coin vault with
lock and key in the meter case opening.
Remove cardboard or hardboard from under dryer. Adjust the
legs of the dryer up or down unl the dryer is level.
foot
diamond
Loading ...
Loading ...
Loading ...