Loading ...
Loading ...
Loading ...
Operations
English52
Operations
04 Filter Reset (3 sec)
Filter Reset
After about 6 months (approximately 300 gallons) of using the original
water lter, the Filter indicator turns red to remind you that the lter
needs to be replaced. If this happens, replace the lter, and press and
hold Filter Reset for 3 seconds. The lter indicator will be reset, and
the Filter indicator turns off.
NOTE
Some regional areas have relatively large amounts of lime contained
in the water. This may reduce the lifecycle of the lter. In these areas,
you will have to replace the water lter more often than specied
above.
05 Door Alarm / Vacation (3 sec)
Door Alarm
You can set the alarm for a reminder. If the door is left open for more
than 2 minutes, the alarm will sound with the alarm indicator blinking.
The alarm is enabled by factory default. To disable the alarm, press
Door Alarm. To enable, press Door Alarm again.
Vacation
The Vacation button can be used to activate/deactivate Vacation mode.
If you are going on vacation or a business trip, or if you do not intend
to use the refrigerator for an extended time, use the Vacation feature.
Press and hold Vacation for 3 seconds to turn off the fridge operation
with the Vacation indicator ( ) on.
NOTE
It is strongly recommended to empty the fridge compartment and
make sure the door is closed.
Device
authentication
When connecting the refrigerator to SmartThings App or Samsung
smart devices such as Samsung Smart TVs, follow the app’s or device’s
onscreen instructions and press and hold Door Alarm for 5 seconds.
The temperature panel displays “on” for 5 seconds before proceeding
with the authentication procedure. Note that the Vacation function will
be not affected by this authentication.
Untitled-38 52 2018-06-08  2:16:56
Loading ...
Loading ...
Loading ...