Loading ...
Loading ...
Loading ...
28
EN
MANUAL MODE
• The appliance should not be immersed. Never
put the motor unit (A) under running water.
Once you have finished using it, disconnect the
appliance.
• Clean the bowl immediately after use.
• Press the locks (D2) then lift the bowl
assembly (D).
• Place the bowl on a flat surface.
• Unlock the lid by rotating one quarter of a turn
clockwise. Carefully remove the lid.
• When the parts have cooled, unclip the seal
holder from the lid with help of the spatula (G)
(See Fig. 15).
• Take care with the knives of the ultrablade
knife (F1) and the kneading / crushing knife
(F4) when you are cleaning them and when
you empty the bowl, they are extremely
sharp.
• When the parts have cooled down:
- dismantle the common spindle (D3), the seal
(D4) and the locking ring (D5) (See Fig. 13).
- clean the bowl (D), the common spindle
(D3), the seal (D4), the locking ring (D5),
the accessories (F1), (F2), (F3), (F4), (F5),
the steam regulator cap (E1), the lid (E2),
the seal holder (E3) and the seal (E4) using
a sponge and some soapy water.
• Rinse these different parts under running water.
• For baked-on food, let the bowl soak for several
hours in water and dishwashing detergent and
CLEANING YOUR APPLIANCE
1- Press directly on the selector
representing the parameter
you have chosen to adjust,
i.e. the speed selector (B2)
or the cooking temperature
selector (B3) or the time
selector (B4), the chosen parameter flashes on
the screen (C1- C2-C3).
2- Then adjust the setting(s)
using the +/- selector (B6).
For safety reasons, it is not
possible to set a temperature
without setting a cooking
time.
3- When you have finished
entering all your parameters,
press the “start” button
(B7). When your appliance is
using cooking mode, the red
indicator light (B3) lights up
to inform you that cooking has started. When the
programme has started, you have the possibility
of stopping the appliance at any time by pressing
the “stop” button.
The programme is then in pause mode and you
have the possibility of restarting by pressing
“start” again. If you have chosen the wrong
programme and if you want to cancel it, press and
hold the "stop" button for 2 seconds.
4- When the programme has ended, the appliance
emits 3 beeps.
5- Press the locks (D2) and then remove the bowl
assembly (D) (See Fig. 12).
Turbo / Pulse functions
1- Use the control panel (B) to directly access
the “turbo” and “pulse” functions (B5). To use
in turbo mode (maximum speed in direct
access), simply press and hold the “turbo”
selector. The LCD screen then displays the time
in use (C3) to help you. To use the pulse
(intermittent operation), activate and stop the
function by simply pressing the “pulse”
selector. Here too, the LCD screen helps you by
indicating the time in use. When the function
has started up, you have the possibility of
stopping the appliance at any time by pressing
the “stop” button. The function is then in
pause mode, you have the possibility of
restarting by pressing the "start” button
again.
Loading ...
Loading ...
Loading ...