Loading ...
Loading ...
Loading ...
10
Synchronizing your
toothbrush
(depending on model)
To avoid interference of display messages when
using more than one Oral-B toothbrush with radio
transmission and SmartGuide in the same house-
hold, you need to assign the handles to their
respective SmartGuide.
You can synchronize a maximum of 2 handles
with one SmartGuide. To do so, push the «h/min»
button in the battery compartment for at least
3 seconds.
The SmartGuide shows «L---». Turn on your handle
to start the synchronization process. It is finished
when «L-1-» is displayed. Turn off the handle. To
assign a second handle to the same SmartGuide turn
on the other handle until «L-2-» is displayed. After
having synchronized the second handle, «Full» will
be displayed. Exit the synchronization mode by
pressing the «h/min» or «set» button, otherwise it
will end automatically after 30 seconds.
Connecting your tooth-
brush to your Smart Phone
Download the Oral-B™ app for free from App
Store
(SM)
or Google Play™. The Oral-B™ app gives
you the opportunity to use your time more
efficiently, chart your brushing progress and
customize your toothbrush settings (for more
benefits see the Oral-B™ app instructions).
• Before using the Oral-B™ app make sure
Bluetooth is activated on your smart phone (for
directions please refer to your smart phone’s user
manual). Your toothbrush will appear in the list of
devices as: «Oral-B toothbrush».
Note: Oral-B™ app functionality is limited if
Bluetooth is deactivated.
• Start the Oral-B™ app. You can use the app and
your SmartGuide (i) at the same time.
• Once you start using your toothbrush by lifting it
off the plugged-in charger (h) or pressing any
button (c)/(d), it automatically connects to the
Oral-B™ app. If no connection has been
established, briefly press the mode button (d) on
your toothbrush handle and wait for a connection.
• Any further app instructions will be displayed on
your smart phone.
• Keep your smart phone in close proximity when
using it with your toothbrush handle. Make sure
the smart phone is safely positioned in a dry
place.
Note: Your smart phone must support Bluetooth 4.0
(or higher) in order to connect to your toothbrush
handle.
Cleaning
recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off and
remove the brush head. Clean handle and brush
head separately; wipe them dry before reassembling.
Disassemble the charging unit before cleaning. Brush
head compartment and protective cover are dish-
washer-safe. Both basic charger and SmartGuide
should be cleaned with a damp cloth only.
The removable inner part of the travel case (m) is
dishwasher-safe. The outer case should only be
wiped clean with a damp cloth (picture 7, page 5).
Make sure that travel case parts are completely dry
before reassembling and toothbrush/brush heads
are dry before storing in the travel case.
Note: Clean stains on the travel case surface
immediately. Store travel case in a clean and dry
place.
Wall mount (depending on model)
Use the adhesive ring (l) with the wall mount (k)
if you prefer to mount the SmartGuide on a wall,
mirror or other surface. Make sure the chosen
surface is clean and dry before adhering.
Stick the adhesive ring on the even side of the
wall mount and press it firmly to the wall. Wait 24h
before sliding the SmartGuide holder (j) into the
fixed wall mount. Place the SmartGuide into its
holder (picture C, page 4). The adhesive ring will
not work on dirt-repellent surfaces.
Subject to change without notice.
Environmental Notice
Product contains batteries and/or recyclable
electric waste. For environment protection
do not dispose in household waste, but for
recycling take to electric waste collection
points provided in your country.
Removing batteries
Handle battery
At the end of the product’s useful life, open the
handle as shown, remove the rechargeable battery
and dispose of it according to local environmental
regulations.
96846214_D36MHF_NA.indd 1096846214_D36MHF_NA.indd 10 05.06.14 08:0605.06.14 08:06
Loading ...
Loading ...
Loading ...