Loading ...
Loading ...
Loading ...
7
Operating Instructions
E n e r g y O p t i o n S e l e c t i o n s
Hi-Temp
When HI-TEMP option is selected, the dishwasher
heats water in the main wash to approximately
140
0
F (60
0
C).
This increase in water temperature helps
dishwasher detergent remove food, grease and soil
from dishes more effectively and aids in drying. HI-
TEMP option can only be used with AUTO, HEAVY,
NORMAL and UPPER cycles.
Sanitize
To sanitize your dishes and glassware, select the
SANITIZE option. This option heats the water
temperature in the fi nal rinse to 157
0
F (69.4
0
C)
and maintains that temperature for 7 minutes.
SANITIZE is available in Auto, Heavy, and Normal
cycles. Only these sanitization cycles have been
designed to meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached. Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120
0
F (49
0
C).
If the SANITIZE option is selected, the pad
illuminates with a blue light. The sanitization
criteria may not be satisfi ed if there is an
interruption of the cycle, a power failure occurs,
or if incoming water temperature is below 120
0
F
(49
0
C).
Sanitize pad fl ashes at the end of the cycle if the
NSF requirements for sanitization are not reached.
Child Lock Controls/Air Dry
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the AIR DRY
pad until “ ” shows in the status window. The
controls are locked and no new selections can
be made until the lock is released. To unlock
the controls, press the AIR DRY pad until “ ”
disappears.
Max Dry
MAX DRY is available on Auto, Heavy, Normal,
Upper and Stemware cycles The cycle time will
increase when MAX DRY option is selected.
O p e r a t i o n S e l e c t i o n
Delay
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
Select your desired cycle and options, then press
the Delay pad until the desired delay time displays
in the status window. The LEDs of selected cycle
and options are illuminated. The status window
displays the delay time and then displays ‘Press
Start’.
To start the delay countdown, press START
pad and close door immediately. The status
window displays ‘Close door’ after the START
pad is pressed. A tone will sound indicating that
countdown has started after the door is closed.
The selected cycle starts when the countdown is
completed.
When cycle and options are selected, the LEDs
of selected cycle and options are illuminated. The
status window displays the cycle time and then
displays ‘Press Start’.
To start the cycle, press START pad and close the
dishwasher door immediately.
The status window displays ‘Close door’ after the
START pad is pressed.
A tone will sound indicating the cycle has
successfully started after the door is closed.
Start
Both running cycle and delay countdown can be
cancelled at any time. Open the dishwasher door,
press the CANCEL pad until you hear a tone. The
running cycle or delay countdown is cancelled.
If desired, a new cycle can now be selected, by
pressing the START pad and closing the door
immediately, the new cycle will begin.
Cancel
Loading ...
Loading ...
Loading ...