Loading ...
Loading ...
Loading ...
4
Feature Overview
H o w y o u r d i s h w a s h e r c l e a n s
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against
soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading,
then fi lls with water covering the fi lter area. Water is then pumped through the spray arms. Soil particles
go through and across the fi lter and down the drain as the water is pumped out. This series of steps are
repeated as needed. The number of water fi lls varies with the cycle being used.
G e t t i n g S t a r t e d
To run your dishwasher, follow these basic steps:
1. Load Dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
5. Select desired CYCLE (See Cycle Selections
Chart).
6. Select desired OPTION (See Energy Option
Selection).
7. To start, press START pad and close door
immediately.
Upper Spray Arm
Adjustable Rack
Mechanism
Flex Wash
Silverware Basket
Filters
Serial Label
(located on right
side of door)
Tub Gasket
Cup Shelves
Soft Grip Rack
Middle Spray
Arm
Bottom Rack
Stemware
Holder
Lower Spray
Arm
Detergent
Dispenser
Rinse Aid
Dispenser
Cutlery Tray
Upper Rack
Interior Light
NOTE
Racks and Features in your dishwasher model
may vary in appearance from illustrations in this
manual
Loading ...
Loading ...
Loading ...