Documents: Go to download!
- Owner's manual - (English, French, Spanish)
- Control panel
- Simple steps to start
- OPERATIONS
- Special features
- Maintenance
- Troubleshooting
Table of contents
Gas Dryer User Manual
Control panel
NOTE
- Do not take extremely tangled items from your washer and put them into the dryer. They can degrade the drying efficiency of the dryer or cause the door to open. We recommend that you untangle the items before putting them into the dryer. Also, do not put objects on the dryer, especially on the control panel.
CAUTION Do not spray water onto the feature panel. This may cause a system failure.
Icon description
Sensor Dry | This icon appears when the dryer operates the cycle which senses the internal humidity to determine the drying time. Filter Check | |
Filter Check | This icon displays after every load as a reminder to clean the lint filter. Clean the lint filter before every cycle and make sure the filter is properly inserted before starting a cycle. | |
Steam | This icon appears when the dryer is in steam process. The dryer sprays water into the drum to deodorize clothes and reduce static electricity and wrinkles. | |
Child Lock | This icon indicates that Child Lock is on. For more information on Child Lock | |
Alarm Off | This icon indicates that the alarm is off. For more information on Alarm Off | |
Wi-Fi | Wi-Fi This icon indicates that the dryer is connected to Wi-Fi. |
Simple steps to start
- Press POWER to turn on the dryer.
- Turn the Cycle Selector to select a cycle.
- Change the cycle settings (Dryness, Temp., and Time) as necessary.
- Select desired options as necessary.
- Press and hold Start/Pause (Hold to Start). The dryer indicator turns on with an estimated cycle time on the display.
To change the cycle during operation
- Press Start/Pause (Hold to Start) to stop operation.
- Select a different cycle and repeat steps 2-4 above if necessary
- Press and hold Start/Pause (Hold to Start) again to start new cycle.
Cycle overview
Cycle | Description |
---|---|
NORMAL | For most fabrics including cottons and linens. If NORMAL is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Control panel” section. |
HEAVY DUTY | For drying items made out of heavy fabrics, such as jeans, corduroys, or work clothes, with high temperature heat. |
BEDDING | For bulky items such as blankets, sheets, and comforters. |
PERM PRESS | For drying wrinkle-free cottons, synthetic fabrics, knits, and permanent press fabrics automatically. |
STEAM SANITIZE+ | Use to sanitize items by applying steam and high-temperature heat to the fabric. This cycle can make items soft and reduce smells. Confirm that the laundry load is wet or partially wet before starting this cycle. |
REFRESH | Use to smooth out wrinkles and reduce odors in loads of one to four items. With this cycle selected, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. Before removing the laundry, confirm that the laundry load is dry. |
DELICATES | For heat-sensitive items at a low drying temperature. |
ACTIVEWEAR | For exercise wear and outdoor wear such as sports jerseys, training pants, water-repellent jackets, and other performance clothing. Thick fabrics like a zipper or velcro closure of a jacket, or training socks may not be completely dried. |
DOWNLOADED |
|
Manual Dry
You can change the drying settings manually to your preference.
QUICK DRY | A quick drying cycle that runs for 30 minutes. |
---|---|
TIME DRY | YIf TIME DRY is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Control panel” section. |
AIR FLUFF | Tumbles the load in room temperature air. |
OPERATIONS
Drying guide
The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference.
Cycle | Description |
---|---|
Bedspreads & Comforters | Follow the care label instructions or dry using Bedding.
|
Blankets | Use Normal and dry only one blanket at a time for best tumbling action.
|
Curtains & Draperies | Use PERM PRESS and the Medium temperature setting to help minimize wrinkling.
|
Cloth Diapers | Use Normal and the Medium temperature setting for soft, fluffy diapers. |
Down–filled Items (jackets, sleeping bags, comforters, etc.) | Use Normal and the Medium temperature setting.
|
Foam Rubber (rug backs, stuffed toys, shoulder pads, etc.) | Do not dry on a heat setting. WARNING Drying a rubber item with heat may damage it or cause a fire. |
Pillows | Use Normal.
|
Plastics (shower curtains, outdoor furniture covers, etc.) | Use TIME DRY and the Low temperature settings depending on the care label instructions. |
WARNING Do not dry:
- Fiberglass items (curtains, draperies, etc.)
- Woolens, unless recommended on the label
- Items spotted or soaked with vegetable or cooking oils
Special features
Child Lock
Child Lock prevents children from playing with the dryer. When Child Lock is activated, all buttons except for the POWER button are disabled.
To activate/deactivate Child Lock, simultaneously press and hold Dryness and Temp. and Time for 3 seconds.
NOTE Once Child Lock is activated, it will remain active even after you restart the dryer. If other buttons, except for the Power button, do not respond, check the Child Lock indicator. If the indicator is on, follow the instructions above to turn Child Lock off.
Smart Care
To enable this function, you must first download the SmartThings app at the Play Store or the App Store and install it on a mobile device featuring a camera function. The Smart Care function has been optimized for Galaxy & iPhone series (applicable models only).
- When the dryer detects an issue to check, an information code appears on the display. To enter Smart Care mode, press Smart Care.
- The dryer starts the self-diagnosis procedure and displays an information code if a problem is detected.
- Run the SmartThings app on your mobile device, and then tap Smart Care.
- Put the mobile device close to the dryer’s display so that the smartphone camera and the dryer face each other. The app automatically recognizes the information code.
- When the information code is recognized correctly, the app provides detailed information about the problem with applicable solutions.
NOTE
- The function name, Smart Care, may differ depending on the language
- If light is reflected on the display of the dryer, the smartphone may not recognize the information code.
- If the app fails to recognize the information code, you can enter the code manually in the app.
Alarm Off
You can turn the alarm on or off. When the alarm is off, the melody of cycle completion and the power-off beep will not sound. However, the other sounds stay active.
- Press and hold Drum Light for 3 seconds to turn the alarm on or off.
- Your setting will be retained even after you turn off the dryer. You can turn the alarm back on by pressing and holding the same button for 3 seconds.
DOWNLOADED cycle
You can choose from more cycles available on the SmartThings app on your smartphone.
- On your smartphone, select the DOWNLOADED cycle. You can choose from TOWELS, SANITIZE, SHIRTS, JEANS, WOOL, ECO NORMAL, SMALL LOAD, LOW TEMP., RACK DRY, and WRINKLE AWAY.
- Press Power on your dryer.
- Turn the Cycle Selector to DOWNLOADED.
- Press and hold Start/Pause (Hold to Start).
Bixby
Bixby is a Samsung’s intelligence platform, and you can control the product with your voice. To use the voice command feature, you must connect the product with the SmartThings app on your phone. For products that do not recognize voice directly from the product, you can use the Bixby on your smartphone to control some of the functions of your product after connecting to the app.
SmartThings
Wi-Fi connection
On your smartphone, go to Settings, turn on the wireless connection, and then select your AP (Access Point).
- This appliance supports the Wi-Fi 2.4 GHz protocols.
Download
On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), find the SmartThings app using the search term “SmartThings”. Download and install the app on your device.
NOTE
The app is subject to change without notice for improved performance.
Log in
You must first log into SmartThings with your Samsung account. To create a new Samsung account, follow the instructions in the app. You don’t need a separate app to create your account.
NOTE If you have a Samsung account, use the account to log in. A registered Samsung smartphone user automatically logs in.
To register your appliance to SmartThings
- Make sure your smartphone is connected to a wireless network. If not, go to Settings and turn on the wireless connection, and then select your AP (Access Point).
- Open SmartThings on your smartphone.
- If the “A new device is found.” message appears, select Add.
- If no message appears, select + and then select your appliance from the list of devices available. If your appliance is not listed, select Device Type > Specific Device Model, and then add your appliance manually.
- Register your appliance to the SmartThings app.
- Add your appliance to SmartThings. Make sure your appliance is connected to SmartThings.
- When registration is complete, then name of your appliance appears on your smartphone.
Maintenance
Keep the dryer clean to prevent decreased performance and to lengthen its life.
WARNING
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing.
Service personnel - - Do not contact the following parts while the appliance is energized: Control board and inlet valve.
Cleaning
Control panel
- Clean with a soft, damp cloth. Do not use abrasive substances.
- Do not spray liquid cleaning agents directly onto the dryer display.
- Some laundry pre-treatment soil and stain removers may damage the control panel.
- When using liquid cleaning agents, apply them to the cleaning cloth. Do not apply them directly to the dryer. Wipe up any spills or overspray immediately.
Drum
- Remove any stains from the drum with an all-purpose cleaner.
- Tumble old towels or rags to remove any remaining stains or cleaning substances. Stains may be still visible but will not affect subsequent loads.
Powder coated drum
To clean the powder coated drum, use a damp cloth with a mild, non-abrasive cleaner suitable for easily marred surfaces.
Remove cleaner residue and dry with a clean cloth.
Dryer exterior
- Clean with a soft, damp cloth. Do not use abrasive substances.
- Protect the surface from sharp objects.
- Do not place any heavy or sharp objects or a detergent container on the dryer. They can scratch or damage the top cover of the dryer.
- The dryer has a high-gloss finish on the entire surface. Be careful not to scratch or damage the surface.
Exhaust system
- Check and clean the exhaust system on a regular basis to maintain optimum performance.
- The external exhaust hood must be cleaned frequently to ensure proper air flow.
Troubleshooting
Problem | Action |
---|---|
Does not run. |
|
Does not heat. |
|
Does not dry. |
|
Is noisy. |
|
Dries unevenly. |
|
Has odors. |
|
Lint on clothes. |
|
Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release)). |
|
Water drips from the nozzle when STEAM CARE starts. |
|
Sprayed water is not visible during STEAM CARE. |
|
Extended time. |
|
Information codes
If the dryer fails to operate, you may see an information code on the display panel. To determine what you should do, check the list of codes in the table below, and then try the suggested actions.
Code | Action |
---|---|
dC | Operating the dryer with the door open.
|
FC | Invalid power source frequency.
|
AC | Electronic control problem (Invalid Communication).
|
HC | High temperature heating check
|
9C1 | The electronic control needs to be checked.
|
tC | The Thermistor1 resistance is very low or high.
|
tC5 | The Thermistor2 resistance is very low or high.
|
dF | Incorrect door switch.
|
See other models: RT29K5035SL/SA GQ65Q8CNGTXZG RF22NPEDBSG/SA UA65LS03NAWXXY GQ55Q950RGTXZG