Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
The iron is not hot enough
and/or the drip-stop
function has been activated.
Set an ironing temperature that is suitable for
steam ironing ( 2 to MAX). Put the iron on
its heel and wait until the temperature light
has gone out before you start ironing.
The iron does not
produce a steam
boost.
You have used the steam
boost function too often
within a very short period.
Continue ironing in horizontal position and
wait a while before you use the steam boost
function again.
The iron is not hot enough. Set an ironing temperature at which the
steam boost function can be used ( 3 to
MAX). Put the iron on its heel and wait until
the temperature light has gone out before
you use the steam boost function.
Water droplets
drip onto the
fabric during
ironing.
You have not closed the cap
of the lling opening
properly.
Press the cap until you hear a click.
You have put an additive in
the water tank.
Rinse the water tank and do not put any
additive in the water tank.
The set temperature is too
low for steam ironing.
Set a temperature of or 2 higher.
You have used the steam
boost function at a
temperature setting below
3.
Set the temperature dial to a setting between
3 and MAX.
Water drips from
the soleplate after
the iron has
cooled down or
has been stored.
You have put the iron in
horizontal position with
water still left in the water
tank.
Empty the water tank.
Flakes and
impurities come
out of the
soleplate during
ironing.
Hard water forms akes
inside the soleplate.
Use the Calc-Clean function one or more
times (see chapter ‘Cleaning and
maintenance’, section ‘Using the Calc-Clean
function’).
The red light
ashes (specic
types only).
The automatic shut-off
function has switched off the
iron (see chapter ‘Features’,
section ‘Automatic shut-off
function’).
Move the iron slightly to deactivate the
automatic shut-off function. The red AUTO/
OFF light goes out.
The iron makes a
humming sound.
The Ionic DeepSteam
function is on.
If you hear the humming sound when you
iron without steam, stop pressing the Ionic
DeepSteam button. The Ionic DeepSteam
function has no effect when you iron without
steam.
ENGLISH12
Loading ...
Loading ...
Loading ...