INSPECT THE EQUIPMENT
Examine the pump when received to assure there has been no damage in shipping. Should there be any damage
evident, report it immediately to the dealer from whom the pump was purchased. Please check the pump package
to see that it includes the pump and motor (if your pump purchase includes a motor). Thermoplastic and stainless
steel units include a built-in check valve in the discharge head. A three-wire plus a GROUND, single-phase pump
REQUIRES a control box which may be purchased separately if the pump model you have purchased does not
include one. The control box must be matched to the pump motor. Make certain that your available voltage corre-
sponds to the voltage required for your motor. Use only Franklin control boxes on Franklin motors. Two-wire plus
GROUND pump/motor assemblies DO NOT require a control box.
Please be sure to ll in the Installation Record on the following page. The information will be necessary should
your system require servicing.
INSTALLATION AND OPERATING INSTRUCTIONS
FOR TWO- AND THREE-WIRE 4" DEEP WELL PUMPS
Motor
Intake
Screen
1-1/4" NPT Standard
Pipe Thread
Motor Leads
with Ground
Discharge Head
with built-in
check valve
Pump
Cable Guard
Motor Bracket
(left-hand threads)
LR80980
P.O. Box 12010
Oklahoma City, OK 73157-2010
888.956.0000 Fax: 405.228.1561
www.RedLionProducts.com
CAUTION: Before operating
or installing this pump, read this
manual and follow all Safety Rules
and Operating Instructions.
4" DEEP WELL
SUBMERSIBLE PUMPS
NOTE: This pump is equipped with left-hand
threads on the motor bracket housing.
Internal pipe threads in the discharge
head are 1-¼" standard NPT.
1
Loading ...
Loading ...
Loading ...
