Loading ...
TECHNICAL DATA
ENGINE ENAMEL
Rust-Oleum Corporation Form: GDH-118
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
ENGINE ENAMEL
Resin Type
Modified Alkyd
Pigment Type
Varies with Color
Solvents
Acetone and Aromatic Hydrocarbons
MIR
0.95 Max
Fill Weight
11 and 12 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Practical Coverage
at Recommended DFT
10-12 sq.ft./can
(0.90-1.09 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Full Cure
7 days
Dry Heat Resistance
500°F (260°C) Intermittent
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.