Loading ...
Loading ...
Loading ...
English 6
Cleaning and Maintenance
Cleaning Maintenance
Removing the Drawer
1. Pull drawer to fully open position.
2. Press down right drawer clip.
3. Lift up left drawer clip.
4. Firmly pull the drawer straight out. Retract cabinet rails
while drawer is removed.
Replacing the Drawer
1. Be sure cabinet rails are pushed inside cabinet.
2. Align the drawer rails with the cabinet rails.
3. Firmly push the drawer straight into the cabinet until
drawer clicks into place.
4. Open and close drawer to test operation. Note: if the
drawer will not close, verify that the rail clips are
properly positioned.
Part Recommendations
Drawer interior
(polished stainless
steel)
Use dish detergent. Wash, rinse
well and dry. For hard water
spots or scale, use white vinegar.
Apply with a sponge or cloth,
rinse, and dry.
Painted surfaces Use hot soapy water or mild
cleaners such as Fantastik or
Formula 409Wash, rinse well
and dry. Avoid using abrasive
cleaning agents, steel wool pads
and oven cleaners.
Drawer exterior
frame (brushed
stainless steel)
Always wipe or rub in the
direction of the grain. Clean with
a soapy sponge, then rinse and
dry, or wipe with Fantastik® or
Formula 409® sprayed on a
paper towel. Protect and polish
with Stainless Steel Magic® and
a soft cloth. Remove water spots
with a cloth dampened with white
vinegar. Use Bar Keeper's
Friend® to remove heat
discoloration.
Warming Drawer
Control
Clean with hot soapy water or
apply Fantastik® or Formula
409® to a clean sponge or paper
towel and wipe clean. Avoid
using abrasive cleaners and
scrubbing pads.
CAUTION
To prevent burns, do not remove drawer while hot.
Be sure drawer is empty before removing.
Lo
w
H
i
g
h
_
M
e
d
Pro
of
+
O
n/O
ff
B
LOW
HIGH
_
MED
P
RO
OF
+
ON/OFF
Loading ...
Loading ...
Loading ...