Loading ...
Loading ...
Loading ...
en Before using for the first time
38
¡ A safety system terminated pro-
cessing.
¡ During processing the swivel arm
disengaged or the release button
for the swivel arm was pressed.
Tip:You can easily adjust an incor-
rect parking position yourself.
→"Troubleshooting", Page44
Safety systems
You can find an overview of your ap-
pliance's safety systems here.
Start lock-out
Start lock-out prevents your appli-
ance from being switched on acci-
dentally.
The appliance can only be switched on
and operated if
¡ the swivel arm is engaged in posi-
tion1 and the bowl or an access-
ory is inserted, e.g. Ice maker.
¡ the swivel arm is engaged in posi-
tion3 and the protective cover or
an accessory is fitted on drive3.
Restart lock-out
Restart lock-out prevents your appli-
ance from automatically restarting
processing after a power failure.
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to .
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
The motor will switch off if
¡ too large a quantity is processed.
¡ a tool or accessory is blocked.
Before using for the first time
Before using for the
first time
Before using for the first time
Prepare the appliance for use.
Preparing the appliance
1. Press the release button and raise
the swivel arm until it engages.
→"Moving the swivel arm",
Page39
2. Turn the bowl clockwise and re-
move.
→"Removing bowl", Page39
3. Clean all parts that come into con-
tact with food before using for the
first time.
→"Cleaning and servicing",
Page41
4. Put the cleaned and dried parts
out ready for use.
Basic operation
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
1. Pull the power cable out to the re-
quired length.
2. To shorten the cable, push it into
the cable storage compartment.
Loading ...
Loading ...
Loading ...