Loading ...
Loading ...
Loading ...
4 ENGLISH
II. Ensuring you get the best from your system
1 Warranty
The BRITA Tap Systems (Models: WD 3010, WD 3020, WD 3030
and WD 3040) are warranted to be free from defects in material
and workmanship at the time of delivery. Any warranty claims will
be voided if defective installation is deemed to have contributed to
malfunction. Installation needs to take place in accordance with the
instructions and all relevant plumbing codes and standards.
The BRITA Tap Systems are designed to operate at a maximum
pressure not exceeding 0.86 MPa (860 kPa or 124 psi) and a maxi-
mum temperature of 30 °C. Ensure that pressure and temperature
do not exceed these limits.
Our goods come with guarantees that cannot be excluded under
the Australian and New Zealand Consumer Law. You are entitled to
a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also enti-
tled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
In the event of a warranty claim, for Australia and New Zealand,
please contact BRITA Water Filter System Distributors Pty Ltd,
Level 9, 123 Epping Road North Ryde NSW 2113 Australia
email: solutions@ BRITA.com.au
Phone: Aus: 1300 557 762, NZ: 08004 BRITA
2 Contents of the BRITA Tap Starter Kit
To ensure you get the best result from your BRITA Tap System,
please follow these instructions carefully.
Your BRITA Tap Starter Kit includes the following
(see fi g. 1):
To ensure you get the best result from your BRITA Tap, please
follow these instructions carefully.
Your BRITA Tap Starter Kit includes the following (see fi g. 1):
1. Filter head with three settings (“C”, “+”, and ”++”) including
a convenient locking handle
2. Flexible wall mount bracket for fi lter head
3. A 1000 water fi lter cartridge
4. BRITA Tap (design may differ from image shown)
5. Electronic BRITA cartridge exchange indicator with digital display
and audible alarm
6. Hose (1) length = 800 mm, 1/2" nut on one side and M8
connector on the other side, 2 Hoses (2+3), length = 450 mm,
1/2" nut on one side and M8 connectors on the other side
7. Hose (4), length = 800 mm and 1/2" female nut on one end and
3/8" female nut at other end – for connection between cold
1. 2.
3. 4.
5.
6.
7.
8.
10.
(fi g. 1)
9.
11.
Loading ...
Loading ...
Loading ...