Loading ...
Loading ...
Loading ...
29
and then in a thick rug or blanket and keep it in
a cool place.
2. Scrape away as much frost build-up as possible
using the plastic scraper. To accelerate the
thawing process place bowls of hot water
inside the Fridge/Freezer cabinet. As the solid
frost loosens, prize it away with the plastic
scraper and remove.
3. When defrosting is completed, clean your
Fridge/Freezer as described.
Cleaning and Care
After defrosting you should clean the Fridge/Freezer
internally with a weak solution of bicarbonate of
soda. Then rinse with warm water using a damp
sponge or cloth and wipe dry. Wash the baskets in
warm soapy water and ensure they are completely
dry before replacing in the Fridge/Freezer.
Condensation will form on the back wall of the Fridge;
however it will normally run down the back wall and
into the drain hole behind the salad bin.
The drain hole will have a “cleaning spike” inserted
into it. This ensures that small pieces off food can not
enter the drain. After you have cleaned the inside of
your Fridge and removed any food residues from
around the whole, use the “cleaning spike” to make
sure that there are no blockages. Use standard
furniture polish to clean the Fridge/Freezer exterior.
Make sure that the doors are closed to prevent
polish getting on the magnetic door seal or inside.
The grille of the condenser at the back of the
Fridge/Freezer and the adjacent components can be
vacuumed using a soft brush attachment.
Do not use harsh cleaners, scouring pads or solvents
to clean any part of the Fridge/Freezer.
CHANGING THE INTERNAL LIGHT
1. Before carrying out the LED replacement
always press and turn the thermostat control
to dial to position 0, then disconnecting the
mains supply.
2. Hold and lift up the LED light cover.
3. Remove the old LED by unscrewing it in an
anti-clockwise direction.
4. Replace with a new LED light by screwing it in a
clockwise direction marking sure that it is
secure in the bulb holder.
5. Refit the light cover and re-connect your
Fridge/Freezer to the mains supply and switch
on.
REVERSING THE DOOR SWING
To change the opening direction yourself, please
follow these instructions:
Tools required: Philips style screwdriver / flat bladed
screwdriver / Hexagonal spanner
1. a. Remove all the cover's screws first.
b. Lift the top cover away from the Fridge.
c. Remove the left hinge cover. Insert the right
hinge cover.
2. a. Undo the screws, lift the hinge bracket up
and take it off.
b. Remove the bolt with a screwdriver and flip
the hinge bracket then reattach the bolt to the
hinge bracket. Remove the fridge door.
3. a. Lift the top hinge cover on the fridge door
and move it to the side you want to install.
b. Take of the middle hinge by removing the
screws. Lift the freezer door up and move it
away.
c. Remove the screws' covers and place them
to the opposite side.
4. Remove the bottom hinge adaptor from the
freezer door. Move the adaptor to the
opposite side. Ensure it is securely located.
5. a. Tilt the fridge carefully. 2 people are
required to tilt the fridge during the door
reversing process.
b. Remove the screws and bottom hinge. Then
remove the adjustable feet from both side and
reattach them to the opposite side.
6. Remove the screw from the bottom hinge and
refit it to the opposite side.
Place the freezer door back on.
7. After placing the freezer door, screw the
middle hinge back onto (the opposite side) the
fridge. Ensure the freezer door is aligned
horizontally and vertically, so that the seals are
closed on all sides before finally tightening the
hinge.
8. Place the fridge door back on. Ensure the
fridge door is aligned horizontally and
vertically so that the seals are closed on all
sides before finally tightening the top hinge.
a. Insert the hinge bracket and screw it to the
top of the fridge.
b. Use a spanner to tighten it if necessary.
9. Put the top cover back and tighten it with the
screws. Reverse step 1a to 1c for details
10. Change the handle（which is the same
method for both fridge door and freezer
door）
a.Remove the right bush on the upper door
trim, install it to left symmetrical position.
b.Remove two side of plastic hole cover and
handle with a screwdriver,
c.fix them on the opposite side. Put the plastic
hole cover that were situated where the
handles are presently.
Double check that the door is aligned correctly and
all the seals are closed on all sides. If necessary, re-
adjust the levelling feet.
NOTE: If you want to have the door swing reversed,
we recommend that your contact a qualified
technician. You should only try to reverse the door
yourself if you believe that you are qualified to do so.
All parts removed must be saved to do the
reinstallation of the door. You should rest the fridge
freezer on something solid so that it will not slip
during the door change process. Do not lay the fridge
freezer flat as this may damage the coolant system.
Ensure the fridge freezer is unplugged and empty.
We recommend that 2 people handle the fridge
freezer during assembly.
Loading ...
Loading ...
Loading ...