Loading ...
Loading ...
Loading ...
Installation
74
Aligning the appliance
To align the appliance, adjust the
front feet using the spanner supplied.
Supporting the appliance door
Ensure that you unscrew the
adjustable foot from the lower
hinge plate with the enclosed
spanner until it sits on the floor. Then
unscrew the foot by a further ¼turn.
Installing the appliance in
existing kitchen units
Risk of fire and damage due to
insufficient ventilation!
If the appliance is not ventilated
sufficiently, the compressor will run
more frequently and for longer
periods. This will result in increased
energy consumption and a higher
operating temperature of the
compressor. This, in turn, can result
in damage to the compressor.
Please ensure that there is adequate
ventilation around the appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
The larger the ventilation gap, the
more economically the compressor
will work.
– A ventilation gap of at least 50mm
depth must be provided at the back
of the appliance behind the whole
width of the top box for air to
circulate.
– The ventilation gap under the ceiling
must be at least 300cm
2
to ensure
that the warm air can escape
unhindered.
Loading ...
Loading ...
Loading ...