Loading ...
Loading ...
Loading ...
Problem solving guide
64
Message Possible cause and remedy
lights up red in the
display and an alarm
sounds.
There is a power cut: The temperature in the
appliance over the last few days or hours has risen
too high because of a power cut or an interruption to
the power supply.
Touch
in the display.
The fault message is confirmed:
goes out and the alarm will stop.
The start screen appears in the display: the warmest
temperature recorded in the freezer section will flash
in the display for about 1minute. Then the current
temperature in the freezer will be displayed.
You can exit the flashing temperature display early:
Touch the temperature display for the freezer
section.
The warmest temperature display will disappear. The
display will revert to showing the current temperature
in the freezer. The appliance will operate at the last
temperature setting when the power is restored.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
Loading ...
Loading ...
Loading ...