Loading ...
Loading ...
Loading ...
9
8
Avoid pinching
the wires
6
8
31
32
3
8. Untie and discard the wire tie on the Main
Wire (31).
While a second person holds the Console (6)
near the Upright (3), plug the Main Wire (31) and
the Pulse Wire (32) into the receptacles on the
Console.
The connectors on the Wires (31, 32) should
slide easily into the receptacles and snap
into place. If a connector does not slide eas-
ily into a receptacle, turn the connector and try
again. If you do not connect the connectors
properly, the console may become damaged
when you use the exercise bike.
Insert the excess wire into the Upright (3).
Tip: Avoid pinching the wires. Attach
the Console (6) to the Upright (3) with four
M4 x 16mm Screws (8); start all the Screws,
and then tighten them.
6
38
37
9
9. Attach the Tablet Holder (38) to the Console (6)
with four M4 x 16mm Machine Screws (37); start
all the Machine Screws, and then tighten
them.
Loading ...
Loading ...
Loading ...