Loading ...
Loading ...
Loading ...
7
3
11
67
43
2
1
3. Loosen the Adjustment Knob (11), slide the Rear
Frame (43) out of the Front Frame (1), and then
tighten the Adjustment Knob.
Note: After the exercise bike is assembled, see
HOW TO ADJUST THE SEAT FRAME on page
12 and adjust the Rear Frame (43).
Set a sturdy piece of packing material under the
Rear Frame (43). Attach the Rear Stabilizer (2)
to the Rear Frame with two M10 x 68mm Screws
(67). Then, remove the packing material.
4
4. Orient the Upright (3) as shown. Tip: Avoid
pinching the Main Wire (31). Attach the Upright
to the Front Frame (1) with four M8 x 16mm
Screws (35); start all the Screws, and then
tighten them.
Next, locate the wire tie (A) in the Upright (3).
Tie the lower end of the wire tie to the Main Wire
(31). Then, pull the upper end of the wire tie until
the Main Wire is routed through the Upright.
Tip: To prevent the Main Wire (31) from fall-
ing into the Upright (3), secure the Main Wire
with the wire tie (A). Then, insert the excess
Main Wire into the Upright.
3
31
35
1
Avoid pinching
the Main Wire (31)
A
A
5
5. Orient the Rear and Front Shield Covers (9, 19)
as shown.
Press the Rear and Front Shield Covers (9, 19)
together around the Upright (3), and join them
with two M4 x 12mm Screws (61).
Then, press the Rear and Front Shield Covers
(9, 19) downward onto the Left and Right
Shields (17, 18).
9
19
17, 18
61
61
3
Loading ...
Loading ...
Loading ...