Loading ...
Loading ...
Loading ...
13
To replace the remote control batteries:
1 Open the battery compartment.
2 Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Note
Before pressing any function button on the remote
control, fi rst select the correct source with the remote
control instead of the main unit.
If you are not going to use the remote control for a
long time, remove the battery.
•
•
Set clock
1
In the standby mode, press and hold
CLOCK to enter the clock setting mode.
The hour digits are displayed and begin
to blink.
If the hour digits are not displayed,
press and hold
for more than 2
seconds to switch to standby mode,
then repeat step 1.
2 Press + VOL - to set the hour.
The minute digits are displayed and
begin to blink.
3 Press + VOL - to set the minute.
4 Press CLOCK to confi rm the clock setting.
Turn on
1
Press .
The audio system switches to the last
selected source.
Switch to standby mode
1 Press to switch the audio system to Eco
Power Standby mode.
»
»
»
»
1 Prepare the AC adaptor.
2 Connect one end to the DC IN socket on
the main unit.
3 Connect the other end to the wall outlet.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
For fi rst-time use:
1 Remove the protective tab to activate the
remote control battery.
bb
cc
English
EN
Eng_Fre_Spa_Ger.indd Sec1:13Eng_Fre_Spa_Ger.indd Sec1:13 2008-07-16 16:39:532008-07-16 16:39:53
Loading ...
Loading ...
Loading ...