Loading ...
Loading ...
Loading ...
If the appliance is not functioning properly,
check that:
The plug is firmly in the wall socket and
the mains power switch is on;
There is electricity supply (find out by
plugging in another appliance);
If there are water drops on the bottom of
the cabinet, check that the defrost water
drain opening is not obstructed (see
“Defrosting” section).
If your appliance is still not working
properly after making the above checks,
contact the nearest service centre.
If the power cable is damaged, it must
be replaced immediately by an authorized
service agent.
To obtain fast service, please indicate
the model and serial number of your
appliance which can be found on the
guarantee
or on the rating
plate located inside the appliance, on
the bottom left-hand side.
CUSTOMER SERVICE AND SPARE PARTS
ELECTRICAL CONNECTION
Before plugging in, ensure that the voltage
and frequency shown on the serial number
plate correspond to your domestic power
supply. Voltage can vary by ±6% of the
rated voltage.
The appliance must be earthed
The power supply cable plug is provided
with a contact for this purpose. The power
socket must have an earth connection in
line with electrical safety regulations.
The Manufacturer declines all
responsibility if the above safety
precautions are not observed.
INSTALLATION
Important
In order to reserve the required space
around the refrigerator for ventilation,
please keep 100mm distance around the
sides and top of the refrigerator. A 50mm
minimum distance from the back wall is
also required.
6
Loading ...
Loading ...
Loading ...