Loading ...
Loading ...
Loading ...
56
Instructions
Istruzioni
Machine actions Causes Solutions
There is a lot of ground co ee under or
over the brew group.
The co ee used may not be suitable for automatic
machines.
You may need to change the type of co ee or the co ee
grinder settings (see the “Adjusting the Ceramic Co ee
Grinder” chapter).
The machine is adjusting the co ee grinder for a
new kind of co ee beans or pre-ground co ee.
The machine automatically adjusts itself after brewing
several cups of co ee in order to optimise extraction in
relation to the compactness of ground co ee.
It may be necessary to brew 2 or 3 products to completely
adjust the co ee grinder.
This is not a machine malfunction.
The machine produces too humid or too
dry co ee grounds.
Adjust the co ee grinder. Adjusting the ceramic co ee grinder a ects the quality of
residues.
If the residues are too humid, set a coarser grind.
If the residues are too dry, set a ner grind.
Refer to the “Adjusting the Ceramic Co ee Grinder” chap-
ter.
The machine grinds the co ee beans
but no co ee is brewed (see note).
There is no water. Fill the water tank and prime the circuit (see the "Manual
Rinse Cycle" chapter).
The brew group is dirty. Clean the brew group (see the “Weekly” section of the
“Brew Group Cleaning” chapter).
This might occur when the machine is automatically
adjusting the dose.
Brew some cups of co ee as described in the “Gaggia
Adapting System” chapter.
The dispensing spout is dirty. Clean the dispensing spout.
The co ee is too weak (see note). This might occur when the machine is automatically
adjusting the dose.
Brew some cups of co ee as described in the “Gaggia
Adapting System” chapter.
The ground co ee is too coarse. Change co ee blend or adjust grinding as explained in the
“Adjusting the Ceramic Co ee Grinder” chapter.
Co ee is brewed slowly (see note). The co ee grind is too ne. Change co ee blend or adjust grinding as explained in the
“Adjusting the Ceramic Co ee Grinder” chapter.
The circuits are clogged. Perform a descaling cycle.
The brew group is dirty. Clean the brew group (see the “Weekly” section of the
“Brew Group Cleaning” chapter).
Co ee leaks out of the dispensing
spout.
The dispensing spout is clogged. Clean the dispensing spout and its holes.
Loading ...
Loading ...
Loading ...