Loading ...
Loading ...
Loading ...
Insert the water filter as far as it will go
with the front knobs in a horizontal position
and turn clockwise until it snaps in.
Route the power cord
towards the electrical outlet.
Route the water line towards
the water shut-off valve.
Open the door and
remove the transit
support.
Remove the
tapes.
Remove the mounting
strip from the attachment
bracket, turn 180° and
insert into the attachment
bracket as far as it will go.
16
I
nStallatIon
Apply the appliance cover strips to
the left and right front edge of the
appliance housing, align in height
with the top profile and screw into
place. The strip is transparent so
the designed mounting holes on
the appliance housing are visible.
We recommend that you mark and
pre-drill the hole positions in the
strip.
IMPORTANT
Complete the installation
before switching on the
device.
Tx™ 10
IMPORTANT
Use the correct flat head
screws, otherwise the edges
of the cabinet will be damaged
when sliding the appliance into
the recess.
Loading ...
Loading ...
Loading ...