Loading ...
Loading ...
Loading ...
23
Operation
Throw away the ice (about 20 pieces) and water (about 7 glasses) first
made after refrigerator installation.
The first ice and water may include particles or odor from the feed water pipe
or feed water box. This is necessary in case that the refrigerator has not been
used for a long time.
Keep children away from the dispenser.
Children may play with dispenser and damage switch or lamps.
Be careful that stored items do not fall into and block the ice chute.
Poorly packed items may fall into dispenser and block ice chute an prevent ice
dispensing. The ice chute may also become encrusted with ice flakes if
crushed ice is selected often, this may lead to the ice chute not opening
correctly. If this occurs remove the accumulated ice flakes.
Never store beverage cans or other foods in ice storage bin for the
purpose of rapid cooling.
Such actions may damage the automatic ice maker.
Never use thin crystal glass or crockery to collect ice.
Such glasses or containers may be broken.
Put ice first into a glass before filling water or other beverages.
Water may be splashed if ice is added to existing liquid in a glass.
Never place hands or tools near Ice outlet.
Touching or adjusting the ice chute can result in injury or product damage.
Never remove the ice maker cover.
The Refrigerator should be properly levelled so that the ice storage bin
can be fully filled with ice.
The ice is dispensed into the same portion of the ice bin all the time, this may
result in the ice "piling up" and resulting in the bin being detected as full when
it is not completely full. Occasionally if ice is not used often, gently shake the
ice bin so that the ice cubes can be leveled in order for the ice maker to
continue to make ice and completely fill the ice bin.
If discolored ice is dispensed, immediately contact service center,
stopping use.
Never use narrow or deep glasses when dispensing ice.
Ice may be jammed in ice chute and, thus, the icemaker may fail.
Keep the glass at a proper distance from ice outlet.
A glass too close to the outlet may hinder ice from coming out, and too far
away may cause ice to over shoot the glass..
Water is cooled while stored in the water tank in the refrigerator
compartment, and then sent to the dispenser.
Ice is made in the automatic ice maker and sent to the dispenser where it is
dispensed as cubed or crushed ice as selected.
How ice/cold
water is supplied
•
It is normal that the water is not very cold at first. If you want colder water, add ice
into the glass.
•
It is also normal for the dispensed water to become warmer during dispensing, until it
has had time to recover.
NOTE
CAUTION
Loading ...
Loading ...
Loading ...