Loading ...
Loading ...
Loading ...
15
Installation
Height adjustment
- The height of the door may not be leveled
when the floor is not level.
When the freezer door is lower –
Use a flat blade screwdriver or spanner to
turn the groove or nut of the height
adjustment foot on the left to the
counterclockwise direction to level the
door.
When the fridge door is lower –
Use a flat blade screwdriver or spanner to
turn the groove or nut of the height
adjustment foot on the right to the
clockwise direction to level the door.
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
When the floor is
not leveled
(refrigerator rocks
horizontally)
When the fridge door is lower than the freezer door while using the
refrigerator, level the doors.
1. Use the tool for adjustment on
the wide side to turn nut ( )
in the clockwise direction to loosen
the keeper nut.
2. Use the tool for adjustment on
the narrow side to turn the
adjustment hinge pin in
( )clockwise direction or
( ) counterclockwise direction
to adjust the height of the fridge
and freezer doors.
3. After aligning the height of the door, turn the keeper nut in counterclockwise
direction tightly.
When the fridge
door is lower than
the freezer door
After leveling the
door height
Keeper nut
Adjustment
hinge pin
Tool for
adjustment
Up
Down
Height difference
Height difference
When using
the driver
When using
the spanner
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, and any covers, etc., in their proper
places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
Do not over adjust to level the height. The hinge pin may fall out.
(Adjustable range of height is a maximum of 2" (5 cm))
CAUTION
Loading ...
Loading ...
Loading ...