Loading ...
Loading ...
Loading ...
6
ASSEMBLY INSTRUCTIONS
• The castors must be attached before the heater is operated.
• Castors are supplied with the device. You must mount them on the
supplied mounting plates and then attach these to the unit before
use.
WARNING: Do not operate without the castors. Only operate the
heater in an upright position.
POSITIONING THE HEATER
• Place the unit in an upright position on a flat, stable and heat-resistant surface.
• Ensure that there are no flammable or heat-sensitive materials or substances
within one metre of the front and 50 cm of the rear and sides of the unit.
• Do not cover the heater.
CONNECTING THE HEATER
• Before inserting the plug into a suitable socket, make sure that the unit is intact,
properly assembled and that there is no signs of damage to the appliance or its
power cable.
• To avoid overloading a circuit, connect the unit only to a circuit where no other
equipment is connected.
• When the power switch is in the OFF position, insert the plug into an earthed
socket and turn on the power.
DISPLAY SCREEN
LOW
MEDIUM
HIGH
TIMER
POWER
HEAT
LEVEL
Loading ...
Loading ...
Loading ...