ElectriQ DRAGONPLUS11-2.5W User Manual

Loading ...

AUTOMATION

Automation allows an automatic action to be set up for the device. This can be triggered by the

Time, and a range of other influences, depending what other TUYA enabled devices you have on

the network.

1. Press on the Scene tab at

the bottom of the Home

screen

2. Press on the Automation

tab at the top of the screen.

3. Press on the + at the top of

the screen or press on Add

Automatic Action

4. Setup is very similar to the scene

setup on the previous page, and

includes an extra section for

specifying a trigger for the scene to

start.

Press the Pen next to “Please Enter

Scene Name” to input the name for

your Scene

Press the Red Plus next to “When

any condition is satisfied” to add the

trigger

Press the Red Plus next to “Execute

following actions” to add the action

required. Then select the heater

from the list of devices.

6. Chose the function,

set the value for the

function, and then press

the back button in the

top right corner, to

return to the previous

screen.

5. Select the condition when the

automation should start. A

number of triggers can be

combined.

7. Once all the functions required have been

added, press the Save button in the top right

corner to finalize and save your new scene.

The automation is now set up, it can be turned on

and off using the toggle on the home page.

Loading ...

ElectriQ DRAGONPLUS11-2.5W Smart WiFi Alexa Oil Filled Radiator 11 Fin 24 hour and Weekly Timer with Thermostat and Remote