Loading ...
Loading ...
Loading ...
left
back
right
front
left
back
right
front
left
back
right
front
Return Home Function:
When the drone ies a long distance away, you can press the Return Home
button and the drone will return home (location from where it took o)
automatically. Move the right side control stick forward and backward / left and
right, then the drone will stop returning.
Important:
The Return Home function only works when Headless Mode is turned on
Press This Button
Additional instructions for receipt board:
Please make sure the install direction and wire-plus position should be the same
as the following picture or the quadcopter cannot work normally
receipt board socket 1,
connect with right-front electric wire
receipt board socket 2,
connect with left-front electric wire
receipt board socket 3,
connect with left-back electric wire
receipt board socket 4,
connect with right-back electric wire
left
back
right
front
LED lamp holder
camera
socket
How to take video & photo:
1. Install TF card to the camera, press TF card to insert, notice the TF card
metal touch place and insert the TF card according to the sketch map.
2. When pressing down the camera button, the LED indicator will ash once,
showing that the quadcopter is taking pictures. When press down the video
and the LED indicator keeps ashing, then it's recording video. if you need to
button stop recording, then press the video button again, and the LED
indicator will stop ashing, thus nishing a video .When you press the TF
card again,you can pick up the card.
micro
TF CARD
LED State Light
3. When Aerial is over, please disconnect the quadcopter and battery. Pull out
the TF card,put the TF card into the reader,then connect the USB to
computer. A few seconds later, you will nd the Mobile hard disk from my
computer and then you can see aerial data.
Notice:
Please make sure broadcast the video after copied data to computer
and the video broadcast software format only support AVI.
Aerial Camera parameters as below:
Video resolution: 1280*720P/30fps; Camera resolution: 1280*720
Spare Parts:
Below are spare parts for your selection,for more convenience,we listed each
spare part you would buy through local distributors.
SLDR18HD-01 SLDR18HD-02 SLDR18HD-03 SLDR18HD-04
SLDR18HD-05 SLDR18HD-06 SLDR18HD-07 SLDR18HD-08
SLDR18HD-09 SLDR18HD-10 SLDR18HD-11 SLDR18HD-12
SLDR18HD-13 SLDR18HD-15SLDR18HD-14 SLDR18HD-16 SLDR18HD-17
Standard Motor
(Red/Blue)
Reverse Motor
(Black/White)
Clockwise Motor Set
(Red Light)
Clockwise Motor Set
(Blue Light)
Counter-Clockwise
Motor Set(Red Light)
Counter-Clockwise
Motor Set(Blue Light)
Main Shelf Blade Head Cover Charger Box
Receiver
Camera Box
TF Card Battery Gear Holder Transmitter Reader
9 10
www.PyleUSA.com
www.PyleUSA.com