Loading ...
Loading ...
Loading ...
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
183
Mains water connection
Risk of injury and damage due to
incorrect connection.
Failing to connect the appliance
correctly can result in personal injury
and/or material damage.
The appliance may only be
connected to the water supply by a
suitably qualified technician.
Danger to health and property
due to contaminated water.
The quality of the water used must
conform to the requirements for
drinking water in the country in which
the steam oven is being used.
Connect the steam oven to the water
supply.
Connection to the water supply must
comply with the applicable
regulations in the country in which
the appliance is being installed. This
appliance must be installed
according to AS/NZS 3500.1. Back
flow prevention is already integrated
in the appliance.
The steam oven complies with local and
national regulations.
The steam oven must only be
connected to a cold water supply.
If an upstream domestic water
softening unit is connected, please
make sure that the conductivity level
of the water is maintained.
Water damage due to
contamination.
Impurities in the water supply may
accumulate in the valve of the steam
oven. The valve can no longer close
and water is streaming out.
Flush the water lines before
connecting the steam oven or when
working on the water supply line.
The water connection pressure needs
to be between 100kPa (1bar) and
600kPa (6bar). If the pressure is higher
than 600kPa, a pressure reducing valve
must be fitted.
A tap must be provided between the
stainless steel hose and the household
water supply to ensure that the water
supply can be disconnected if
necessary. The tap must be easily
accessible after the steam oven has
been built in.
Loading ...
Loading ...
Loading ...